Wagner by Diversitech WG840464 Multi-Horsepower Direct Drive Furnace Blower Motor, DDFB Enclosure, 1/2, 1/3, 1/4, 1/5, 1/6 hp, 208/230 V AC, 60 Hz, 1 ph, 48 Frame, 1075 rpm Speed, Belly Band/Shaft Up/Down Mount
This Wagner® WG840464 Multiple Horsepower Direct Drive Furnace Blower Motor, 208-230V, 1075/4 Speed, 1/2HP MAX is specially designed to cover a range of applications. The motor is electrically reversible and features 36 in. leads to ease installation.
-
BrandWagner by Diversitech
-
Manufacturer Part NumberWG840464
-
CountryUSA
-
Temperature Rating140 deg F
-
Frame48
-
Frequency Rating60 Hz
-
TypeMulti-Horsepower
-
Mounting TypeBelly Band/Shaft Up/Down
-
RotationReversible
-
Voltage Rating208/230 V AC
-
Amperage Rating7/6.7/4.4/3.2/2.4 A Full Load
-
Application TypeCondenser Fan Motors, Fan & Blower Motors
-
Service Factor1
-
Horsepower1/2, 1/3, 1/4, 1/5, 1/6 hp
-
Shaft Size1/2 in Dia x 5 in L
-
Dimensions5.59 in Dia x 10.292 in L
-
Bearing TypeBall
-
Number of Speeds4
-
Insulation ClassClass B
-
Speed1075 rpm
-
Enclosure TypeDDFB
-
Phase1
- Motors feature reversing plugs, extended thru bolts, 36 in leads and low power consumption
- Ball bearing design allows for greater heat endurance, improved performance, increased reliability, and enhanced motor life
- Extended mounting bolts provides easier installation in cramped spaces and allows the installer to start the threaded mounting nut quickly and efficiently
-
UNSPSC26101100
-
Package DescriptionEACH
-
Warranty2 Years
-
Catalog
-
Specification Sheet
Recently Viewed
This Wagner® WG840464 Multiple Horsepower Direct Drive Furnace Blower Motor, 208-230V, 1075/4 Speed, 1/2HP MAX is specially designed to cover a range of applications. The motor is electrically reversible and features 36 in. leads to ease installation.
The RIDGID® 206 and 246 Soil Pipe Cutters utilize an integral ratchet handle centered on the pipe. This is especially useful when cutting pipe in trenches, and helps keep the width of the trench to a minimum. Both use a unique hooking mechanism to make hooking the chain easier. The 206 uses the same chain as the 226 and 276, while the chain on the 246 is larger and allows it to cut 4 in class 22 water main and 2 to 5 in extra heavy duty soil pipe.
POLYPROYLENE MOLDED PARTS. PUSH AND FOLD DOWN BASE TO REMOVE PAD. EASILY PICKS UP DUST AND ALLERGENS
-JWH600254>
5-GAL NO-LID WHITE PAINT PAILS-JWH782920>
2-11/16"-ID X 2-7/8"-OD VITON O-RING
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
