Jacobs® 3653 Thumb Handle Chuck Key, 5/16 in Dia Pilot, Key Number: K3C, For Use With 34-33 C Chuck, Soft Steel
Jacobs® 3653 Thumb Handle Chuck Key, 5/16 in Dia Pilot, Key Number: K3C, For Use With 34-33 C Chuck, Soft Steel
-
BrandJacobs®
-
UPC095456036536
-
Manufacturer Part Number3653
-
CountryUSA|Canada
-
MaterialSoft Steel
-
TypeThumb Handle
-
Key NumberK3C
-
Suitable For Use With34-33 C Chuck
-
Pilot Diameter5/16 in
- Soft steel handles limit the potential for dangerous fracturing under excessive load
- Never apply extensions, pliers, wrenches or 'cheaters' of any kind to chuck key handles
- Do not subject chuck key handles to hammer or other impact blows
- Precision crafted for an exact fit
- 11 teeth
- Nickel thumb grip styles increase leverage and user comfort
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 3L988 |
| Grainger | 3L988 |
-
Alternative Part Number3L988
-
UNSPSC27111727
-
Package Description1/CD
-
Warranty1 Year
-
Catalog
Recently Viewed
Jacobs® 3653 Thumb Handle Chuck Key, 5/16 in Dia Pilot, Key Number: K3C, For Use With 34-33 C Chuck, Soft Steel
Jacobs® 3653 Thumb Handle Chuck Key, 5/16 in Dia Pilot, Key Number: K3C, For Use With 34-33 C Chuck, Soft Steel
BBI 847226 Partially Threaded Cap Screw, 7/16-14, 2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
BBI 847226 Partially Threaded Cap Screw, 7/16-14, 2 in L Under Head, 5 Grade, Medium Carbon Steel, Zinc CR+3
Jacobs® 30251 T-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: K32, For Use With 3/8 in and 1/2 in Chucks, Soft Steel
Jacobs® 30251 T-Handle Chuck Key, 1/4 in Dia Pilot, Key Number: K32, For Use With 3/8 in and 1/2 in Chucks, Soft Steel
Makita 763411-7A Heavy Duty Chuck Key, 1/2 in Chuck Key, For Use With 6013BR Hand Drill, Aluminum
Makita 763411-7A Heavy Duty Chuck Key, 1/2 in Chuck Key, For Use With 6013BR Hand Drill, Aluminum, Side Handle
Browning® 3748548 Taper Lock Bushing, 1 in Dia Bore, 1.511 in Dia Barrel, 7/8 in OAL, Steel
Koyo IR-2020 Inch Series Regular Width Inner Ring, 1-1/4 in ID x 1-1/2 in OD, 1.265 in OAW, For Use With B-268, B-2610, B-2616, J-2610, J-2616, M-26161, M-26101 Drawn Cup Needle Roller Bearing, Steel
Where it becomes impractical to meet the shaft raceway design requirements (hardness, case depth, surface finish, etc.) outlined in the engineering section, standard inner rings for drawn cup bearings are available. Inner rings for drawn cup bearings are designed to be a loose transition fit on the shaft and should be clamped against a shoulder. If a tight transition fit must be used to keep the inner ring from rotating relative to the shaft, the inner ring OD as mounted, must not exceed the raceway diameters required by the drawn cup bearing for the particular application.


