Thread Forming Taps
MORSE® 36297 2105 Straight Flute Forming Tap, #10-24 Thread, H4 Thread Limit
MORSE® 36311 2105 Straight Flute Forming Tap, 1/4-20 Thread, H6 Thread Limit
ITM C67NS0337 Bottom Tap, 1 in-14 NS Thread, H4 Thread Limit
ITM C67NF0336 Bottom Tap, 1-12 NF Thread, H4 Thread Limit
ITM C67NF0334 Bottom Tap, 7/8 in-14 NF Thread, H4 Thread Limit
ITM C67NF0332 Bottom Tap, 3/4 in-16 NF Thread, H3 Thread Limit
ITM C67NF0328 Bottom Tap, 5/8 in-18 NF Thread, H3 Thread Limit
ITM C67NF0326 Bottom Tap, 9/16 in-18 NF Thread, H3 Thread Limit
ITM C67NF0323 Bottom Tap, 1/2 in-20 NF Thread, H3 Thread Limit
ITM C67NF0321 Bottom Tap, 7/16 in-20 NF Thread, H3 Thread Limit
ITM C67NF0319 Bottom Tap, 3/8 in-24 NF Thread, H3 Thread Limit
ITM C67NF0316 Bottom Tap, 5/16 in-24 NF Thread, H3 Thread Limit
ITM C67NF0312 Bottom Tap, 1/4 in-28 NF Thread, H3 Thread Limit
ITM C67NC0335 Bottom Tap, 1-8 NC Thread, H4 Thread Limit
ITM C67NC0333 Bottom Tap, 7/8 in-9 NC Thread, H4 Thread Limit
ITM C67NC0331 Bottom Tap, 3/4 in-10 NC Thread, H3 Thread Limit
ITM C67NC0327 Bottom Tap, 5/8 in-11 NC Thread, H3 Thread Limit
ITM C67NC0325 Bottom Tap, 9/16 in-12 NC Thread, H3 Thread Limit
ITM C67NC0322 Bottom Tap, 1/2 in-13 NC Thread, H3 Thread Limit
ITM C67NC0320 Bottom Tap, 7/16 in-14 NC Thread, H3 Thread Limit
ITM C67NC0318 Bottom Tap, 3/8 in-16 N Thread, H3 Thread Limit
ITM C67NC0315 Bottom Tap, 5/16 in-18 NC Thread, H3 Thread Limit
ITM C67NC0310 Bottom Tap, 1/4 in-20 NC Thread, H3 Thread Limit
ITM C66NC0333 Plug Tap, 7/8 in-9 NC Thread, H4 Thread Limit
Recently Viewed
SINGLE GROOVE 7/8" -ID A-BELT SHEAVES-BRWAK30X7/8 >
Easy to use.
Economical.
Lightweight.
Maximum operating pressure 100 psi
Minimal fluid spillage.
Reduces risk of exposure.
SpillageData: 2" &mdash: 2.6 ML
Unrestricted 1½" flow.
Wide range of chemical resistance.
FKM seals
When properly installed and operated, the assembly will not accidentally separate while fluid is flowing preventing costly mishaps.
PIX B96/02 IS A CLASSICAL V-BELT, 99" OUTSIDE LENGTH, 5/8" TOP WIDTH, 13/32" THICKNESS, 2 RIB
KEVLAR© IS A HIGH STRENGTH BELT THAT CAN WITHSTAND HIGHER SHOCK LOADS, REVERSE BENDING AND TWISTING OVER LONGER PERIODS OF TIME. THE STRENGTH COMES FROM THE CORDS, WHICH IS A HIGH TENSILE STRENGTH ARAMID FIBER. THESE BELTS USE A SPECIAL OUTER DRY WRAP, WHICH MAKES THEM SUITABLE FOR CLUTCHING APPLICATIONS, LAWN MOWERS OR ANY DRIVES WITH FREQUENT STARTING & STOPPING.
-PIXB96/02 >
16 TOOTH SPROCKETS FOR #100 CHAIN-BRW100B16 >
31/64" DRILLBIT-REPX60031/64>
22 TOOTH SPROCKETS FOR #100 CHAIN-BRW100B22 >
