MORSE C/Tool 36-MM X 3.00 4-FL HAND TAPER TAPS MCT 38176
MORSE® 38176 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M36x3 Thread, D8 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125381769
-
Manufacturer Part Number38176
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length3 in
-
MaterialHSS
-
Thread LimitD8
-
Thread SizeM36x3
-
Thread StandardGround
-
Chamfer TypeTapered
-
Measurement SystemMetric
-
TypeGeneral Purpose
-
Series7500
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Overall Length6-1/16 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 38176 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M36x3 Thread, D8 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
Milwaukee® 49-57-2000 Annular Cutter, 2 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
MORSE® 61255 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
ITM 203HS0042 General Purpose Drill Bit, #42 Drill - Wire, 29/64 in Drill - Fraction, 0.0935 Drill - Decimal Inch, 118 deg Point Angle, M2 HSS, Black Oxide
4-GRV BANDED 3-V X-710 V-BELT-JAS4R3VX710 >
