MORSE C/Tool 2-MM X 0.40 TAPER HAND TAPS MCT 38143
MORSEĀ® 38143 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M2x0.4 Thread, D3 Thread Limit, Tapered Chamfer, 3 Flutes, Bright, HSS
-
BrandMORSEĀ®
-
UPC686125381431
-
Manufacturer Part Number38143
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length7/16 in
-
MaterialHSS
-
Thread LimitD3
-
Thread SizeM2x0.4
-
Thread StandardGround
-
Chamfer TypeTapered
-
Measurement SystemMetric
-
TypeGeneral Purpose
-
Series7500
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length1-3/4 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT3838143 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSEĀ® 38143 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M2x0.4 Thread, D3 Thread Limit, Tapered Chamfer, 3 Flutes, Bright, HSS
DOUBLE-V V-BELTS-JASAA60>
Browning 20-TOOTH SPROCKETS FOR #40 CHAIN BRW H-4020 X 1.3/16
BrowningĀ® finished bore sprockets are offered in single strands. Offerings include 35 to 100 pitch range. Finished bore sprockets are available from 3/8 to 2-7/16 in. Hardened teeth are available up to 30 teeth.
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
MORSEĀ® 32407 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Gripā¢ handles for greater torque and comfort.
