MORSE C/Tool 5-44" MACHINE SCREW BOTTOM TAPS MCT 33820
MORSE® 33820 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #5-44 Thread, H2 Thread Limit, Bottoming Chamfer, 3 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125338206
-
Manufacturer Part Number33820
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length5/8 in
-
MaterialHSS
-
Thread LimitH2
-
Thread Size#5-44
-
Thread StandardGround/UNF
-
Chamfer TypeBottoming
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2068
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length1-15/16 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT3733820 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 33820 2068 General Purpose Straight Flute Hand Tap, Right Hand Cutting, #5-44 Thread, H2 Thread Limit, Bottoming Chamfer, 3 Flutes, Bright, HSS
MORSE® 38107 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M6x1 Thread, D5 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
The Crescent Nicholson single-cut bastard mill files sharpen mill or circular saws and are ideal for draw filing and finishing metals. The rectangular shape lets you smooth and sharpen straight surfaces. 2 square edges allow you to make grooves fixed at the same width as the file, and all sizes taper slightly in width to improve access in slots.
0-100/PSI 1/8" NPT AIR GAUGES-JWH419853>
MORSE® 14304 1385 1-Stage Type B Heavy Duty Jobber Length Aircraft Drill, #78 Drill - Wire, 0.016 in Drill - Decimal Inch, 135 deg Point, HSS
Milwaukee® 48-20-4419 4-Cutter Rotary Hammer Drill Bit, 2 in Drill Bit, 3/4 in Spline Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
