MORSE C/Tool 5/16"-18 HSS 3-FLUTE BOTTOM TAPS MCT 32616
MORSE® 32616 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 5/16-18 Thread, H3 Thread Limit, Bottoming Chamfer, 3 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125326166
-
Manufacturer Part Number32616
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length1-1/8 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size5/16-18
-
Thread StandardGround/UNC
-
Chamfer TypeBottoming
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2046
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-23/32 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 32616 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 5/16-18 Thread, H3 Thread Limit, Bottoming Chamfer, 3 Flutes, Bright, HSS
DRILLCO 21N116FP 2100N Spiral Point Tap, Right Hand Cutting, 1/4-28 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, Oxide Treated, HSS
Nitro Spiral Point CNC Machine Taps. The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
MORSE® 92504 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
Ambore™ 12062 1384 Heavy Duty Jobber Length Drill Bit, 1/16 in Drill - Fraction, 0.0625 in Drill - Decimal Inch, 135 deg Point, HSS, Black/Gold Oxide
MORSE® 38506 7501 General Purpose Spiral Point Tap, M5x0.8 Thread, D4 Thread Limit, Plug Chamfer, 2 Flutes, Bright, HSS
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 1-5/8 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 1-5/8 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
