MORSE® 92487 2068G General Purpose Straight Flute Hand Tap, Right Hand Cutting, #4-40 Thread, H2 Thread Limit, Bottoming Chamfer, 3 Flutes, TiN Coated, HSS
MORSE® 92487 2068G General Purpose Straight Flute Hand Tap, Right Hand Cutting, #4-40 Thread, H2 Thread Limit, Bottoming Chamfer, 3 Flutes, TiN Coated, HSS
-
BrandMORSE®
-
UPC686125924874
-
Manufacturer Part Number92487
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length9/16 in
-
MaterialHSS
-
Thread LimitH2
-
Thread Size#4-40
-
Thread StandardGround/UNC
-
Chamfer TypeBottoming
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2068G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length1-7/8 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
- Titanium nitride (TiN) coating results in an extremely hard surface with high lubricity for increased tool life, improved thread quality, reduced torque and increased tapping speeds for greater productivity
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 92487 2068G General Purpose Straight Flute Hand Tap, Right Hand Cutting, #4-40 Thread, H2 Thread Limit, Bottoming Chamfer, 3 Flutes, TiN Coated, HSS
MORSE® 92487 2068G General Purpose Straight Flute Hand Tap, Right Hand Cutting, #4-40 Thread, H2 Thread Limit, Bottoming Chamfer, 3 Flutes, TiN Coated, HSS
HCI Preferred Supplier 32015 Rigid Adapter, 1/2 x 1/4 in Nominal, Hose Barb x MNPTF End Style, Brass
HCI Preferred Supplier 32015 Rigid Adapter, 1/2 x 1/4 in Nominal, Hose Barb x MNPTF End Style, Brass
10/15000-BTU LP GAS RADIANT HEATER-JWH424544>
60-GALLON 38X60 TRASHCAN LINERS--BOX OF 100-FORIM60WH >
Remke Tuff-Seal™ 7303-003R Non-Insulated Wide Range Strain Relief Grip With Mesh, 1/2 in Trade, 0.4 to 0.54 in Cable Openings, Aluminum
Tuff-Seal™ strain relief grips are used to connect cord or cable to electrical enclosures and equipment, power boxes, portable power tools, panel boards and machine tools. For indoor use only in dry locations, these grips help control arc-of-bend and prevent cable pull-out and damage resulting from flexing. Strain is distributed over the length of these grips instead of at a single point. These tuff seal strain relief grips are made with a single-weave, galvanized steel mesh and feature aluminum fittings and a gasket that provides an environmental seal against dust, filings and other foreign material.
HCI Preferred Supplier 32055 Rigid Hose-to-Pipe Adapter, 5/16 x 1/8 in Nominal, Barb x FNPTF End Style, Brass
HCI Preferred Supplier 32055 Rigid Hose-to-Pipe Adapter, 5/16 x 1/8 in Nominal, Barb x FNPTF End Style, Brass
