MORSE C/Tool 3/8"-16 4-FL TI-COAT BOTTOM TAPS MCT 92434
MORSE® 92434 2046G General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, TiN Coated, HSS
-
BrandMORSE®
-
UPC686125924348
-
Manufacturer Part Number92434
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length1-1/4 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size3/8-16
-
Thread StandardGround/UNC
-
Chamfer TypeBottoming
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2046G
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Overall Length2-15/16 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
- Titanium nitride (TiN) coating results in an extremely hard surface with high lubricity for increased tool life, improved thread quality, reduced torque and increased tapping speeds for greater productivity
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 92434 2046G General Purpose Straight Flute Hand Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Bottoming Chamfer, 4 Flutes, TiN Coated, HSS
External key provides positive drive with no torque on the cap screws. We offer high torque carrying capacity. Double split barrel improves true concentricity. The shaft is gripped with positive clamp fit.
1/8" -MALE PIPE THREADX5-1/2" BLACK NIPPLE-FIT1/8X51/2BN >
Bolt Center [Min] 6.938 in
Inner Race Length (in) 4
Inch/Metric Inch
Inner Race Heat Treat Method Case Carburized Inner Ring
Platform RPB Series
Housing Base Solid
Base Width (in) 2.75
Rolling Element Tapered
Bolt Center Min (in) 6.938
Expansion No
BBI 455463 Partially Threaded Cap Screw, 5/8-11, 8 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
BBI 455463 Partially Threaded Cap Screw, 5/8-11, 8 in L Under Head, 8 Grade, Alloy Steel, Zinc Yellow Bake CR+6
A superior industrial spray paint formulated for maintenance operations where maximum performance is required. This high solids paint does not run or sag, and gives twice the coverage of conventional spray paints. Can be applied to bare metal, but for maximum protection, use our MRO red iron oxide primer (620-1407) or light gray primer (620-1431). Resists oil, gas, heat, and sunlight.
