MORSE® 32325 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-14 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 32325 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-14 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125323257
-
Manufacturer Part Number32325
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length2-1/2 in
-
MaterialHSS
-
Thread LimitH4
-
Thread Size1-14
-
Thread StandardGround/UNS
-
Chamfer TypeTapered
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2046
-
Number of Flutes4
-
Cutting DirectionRight Hand
-
Overall Length5-1/8 in
- Straight flute hand taps are used for hand tapping and machine tapping in through holes or blind holes in a wide variety of materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT3732325 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 32325 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-14 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
MORSE® 32325 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-14 Thread, H4 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
Leviton® 275-T Angled Cable Mount Dual Power Grounding Straight Blade Plug, 125/250 VAC, 30 A, 50 A, 3 Poles, 4 Wires, Black
Leviton® offers a large selection of 15, 20, 30 and 50 A commercial grade straight blade plugs and connectors, available in a wide variety of features. These rugged performers are moisture, chemical and abuse resistant and they are ideal for indoor and outdoor use. Our EPTR rubber backed plugs and connectors stand up to rough use, protecting against dirt and moisture. The deep slotted, backed out terminal screws draw back wire clamps securely over stripped leads for maximum conductivity.
ipg® 99607 Premium Grade Foil Tape, 60 yd L x 2-1/2 in W, 4 mil THK, Kraft Liner, Acrylic Adhesive, Aluminum Foil Backing
ipg® offers a complete line of products specifically engineered to meet the most stringent requirements of the HVAC and B&C industries. These products are engineered for a wide range of applications and environments. ipg® HVAC tapes are UL rated, UL Listed and USGBC LEED point contributors.
Weiler® 10026 Stem Mount End Brush, 3/4 in Dia Brush, Knot, 0.02 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
Weiler® 10026 Stem Mount End Brush, 3/4 in Dia Brush, Knot, 0.02 in Dia Filament/Wire, Steel Fill, 7/8 in L Trim
Hougen® Rotabroach® 12132 12000 Annular Cutter, 1 in Dia Cutter, 1 in D Cutting, M2 HSS, Bright, Weldon with 2-Flat Shank
Hougen "12000 Series" cutters were the original annular cutters invented over 35 years ago. With the most features of any annular cutter, "12000 Series" cutters provide the best performance in the largest variety of materials. Compared to traditional tooling (twist drills, etc.) "12000 Series" cutters can multiply your cutting speed by up to 3 times. And you get longer tool life, a more accurate hole, a better finish, with no burrs. Hougen cutters maximize feed rates because up to 10 cutting edges distribute the cutting load evenly. "12000 Series" cutters convert a smaller area to chips, requiring less horsepower and thrust.
Tiger® 52009 Stem Mount Coated Abrasive Flap Wheel, 1-1/2 in Dia Wheel, 1 in W Face, 1/4 in Dia Shank, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
Tiger® 52009 Stem Mount Coated Abrasive Flap Wheel, 1-1/2 in Dia Wheel, 1 in W Face, 1/4 in Dia Shank, 60 Grit, Medium Grade, Aluminum Oxide Abrasive
