Irwin® Hanson® 8120 General Purpose Straight Flute Tap, Right Hand Cutting, 1/4-20 Thread, Plug Chamfer, (4) Flutes, High Carbon Steel
Irwin 8120 Hanson 1/4"-20 NC HCS Plug Tap - Ideal for tough threading work, routine maintenance, repair and for re-threading where high accuracy and tolerance thread is not critical. Precision ground straight flutes provide rapid chip removal for efficient threading. Tap size and recommended drill bit size are etched on each tool for easy identification. Designed for hand threading work
-
BrandIrwin® Hanson®
-
UPC042526081200
-
Manufacturer Part Number8120
-
CountryUSA
-
MaterialHigh Carbon Steel
-
Thread Size1/4-20
-
Thread StandardUNC
-
Chamfer TypePlug
-
Through Coolant (Yes/No)No
-
Class of Fit2B
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Number of Flutes4
-
Cutting DirectionRight Hand
- Taps produce a class 2B thread
- Straight flutes are ground to provide rapid chip removal for efficient threading
- Designed for hand threading work in a variety of materials
- Ideal for routine maintenance, repair work and for rethreading where high accuracy and tolerance thread is not critical
- Most common chamfer
- Ideal for all general purpose threading
| Competitor Name | Cross-Reference Number |
|---|---|
| MSC | 77252971 |
| 304502 |
-
UNSPSC23241615
-
Package Description1/CRD
-
Catalog
Recently Viewed
Irwin® Hanson® 8120 General Purpose Straight Flute Tap, Right Hand Cutting, 1/4-20 Thread, Plug Chamfer, (4) Flutes, High Carbon Steel
Irwin 8120 Hanson 1/4"-20 NC HCS Plug Tap - Ideal for tough threading work, routine maintenance, repair and for re-threading where high accuracy and tolerance thread is not critical. Precision ground straight flutes provide rapid chip removal for efficient threading. Tap size and recommended drill bit size are etched on each tool for easy identification. Designed for hand threading work
Dodge® 083528 First Stage Pinion Gear, 9 Diametral Pitch, 13 Teeth, 1-1/2 in Dia Pitch
Dodge® 083528 First Stage Pinion Gear, 9 Diametral Pitch, 13 Teeth, 1-1/2 in Dia Pitch
Square D™ EDB34020 Type EDB Molded Case Standard E-FRAME Miniature Circuit Breaker, 277/480Y V AC, 20 A, 18 kA Interrupt, 3 Poles, Thermal Magnetic Trip
E-Frame Breaker are Lighting Panelboard Circuit breakers that are proven effective and reliable which provide a wide variety or robust features that are use specifically in Square D NF Panelboards. This range of breaker is ideally designed to offer superior overload and short circuit protection. All E-Frame breakers have a thermal-magnetic trip unit as well as signal indicator that will indicate when a trip has occur. Mounting bolts are used to hold these breakers in place. This E-Frame breaker is 20A, 3 pole, and has an operating voltage of 480Y/277 VAC. It also provides a 25 kA max interrupt rating at 120 VAC. This device has a hold current of 270A which is the maximum current the breaker can be held to ensure it will trip and a trip current of 875A which is the current value when the breaker is guaranteed to trip. Many accessories are available for this breaker. This breaker was calibrated for 40 degrees C. This product is UL Listed as High Intensity Discharge. HACR rated.
2-5/16" 6-PT 1"-DR I/SOCKETS - ALL37339 >
#10 X 3/4" Pan Head Phillips Sheet Metal Screw
54 TOOTH DOUBLE SPROCKETS FOR #50 CHAIN-BRWD50B54 >
