DRILLCO 215N080A 2150N Spiral Point Tap, Right Hand Cutting, M8x1.25 Thread, D5 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, M35 HSS-Co
Nitro-Max ANSI/ANSI taps are produced with a reduced neck to allow for longer reach, improved coolant flow, and easier chip evacuation. These taps offer higher heat resistance and red hardness over conventional High Speed Steel taps. For CNC applications.
-
BrandDrillco
-
UPC045996892925
-
Manufacturer Part Number215N080A
-
CountryUSA|Canada
-
Finish/CoatingOxide Treated
-
MaterialM35 HSS-Co
-
Thread LimitD5
-
Material ApplicationHigh Tensile Strength Steel and Stainless Steel
-
Thread SizeM8x1.25
-
Chamfer TypePlug
-
Through Coolant (Yes/No)Yes
-
Measurement SystemMetric
-
Series2150N
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-23/32 in
- Available in plug geometry
- Black oxide surface treatment for extended life
- Reduced neck for better clearance in deeper holes
- Black oxide surface treatment provides improved lubricity and helps prevent the formation of built up edge
- Spiral point taps are designed for producing through holes in a workpiece
- Available in plug geometry
- Reduced neck for better clearance in deeper holes
-
UNSPSC27112806
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified|USCTI 302A|PROP65: This product can expose you to chemicals including Cobalt, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
-
SDS
-
Catalog
Recently Viewed
DRILLCO 215N080A 2150N Spiral Point Tap, Right Hand Cutting, M8x1.25 Thread, D5 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, M35 HSS-Co
Nitro-Max ANSI/ANSI taps are produced with a reduced neck to allow for longer reach, improved coolant flow, and easier chip evacuation. These taps offer higher heat resistance and red hardness over conventional High Speed Steel taps. For CNC applications.
Irwin® Hanson® 53406 534 EX-6 Spiral Flute Screw Extractor, #6 Extractor, 13/32 in Drill, For Screw Size: 5/8 to 7/8 in, 3/8 in NPT, 3/8 in BSP, 16 to 22 mm, 3-3/4 in OAL, 13/32 in Shank
IRWIN Spiral Flute Screw Extractors - 534/524 Series.
Proto® TorquePlus™ J5528 Standard Length Socket, Imperial, 3/4 in Square Drive, 7/8 in
MORSE® 38013 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M16x2 Thread, D7 Thread Limit, Plug Chamfer, 4 Flutes, Bright, HSS
12OZ. GAS DRYER ANTIFREEZE-HEE12OZ >
BBI 693380 Teks® Fully Threaded Self-Drilling Screw, #8-18, 3/4 in OAL, Pan Head, Phillips® Drive, Low Carbon Steel, Zinc CR+3, Drill Point
BBI 693380 Teks® Fully Threaded Self-Drilling Screw, #8-18, 3/4 in OAL, Pan Head, Phillips® Drive, Low Carbon Steel, Zinc CR+3, Drill Point
