DRILLCO 215N040A 2150N Spiral Point Tap, Right Hand Cutting, M4x0.7 Thread, D4 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, M35 HSS-Co
Nitro-Max ANSI/ANSI taps are produced with a reduced neck to allow for longer reach, improved coolant flow, and easier chip evacuation. These taps offer higher heat resistance and red hardness over conventional High Speed Steel taps. For CNC applications.
-
BrandDrillco
-
UPC045996892895
-
Manufacturer Part Number215N040A
-
CountryUSA|Canada
-
Finish/CoatingOxide Treated
-
MaterialM35 HSS-Co
-
Thread LimitD4
-
Material ApplicationHigh Tensile Strength Steel and Stainless Steel
-
Thread SizeM4x0.7
-
Chamfer TypePlug
-
Through Coolant (Yes/No)Yes
-
Measurement SystemMetric
-
Series2150N
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-1/8 in
- Available in plug geometry
- Black oxide surface treatment for extended life
- Reduced neck for better clearance in deeper holes
- Black oxide surface treatment provides improved lubricity and helps prevent the formation of built up edge
- Spiral point taps are designed for producing through holes in a workpiece
- Available in plug geometry
- Reduced neck for better clearance in deeper holes
-
UNSPSC27112806
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified|USCTI 302A|PROP65: This product can expose you to chemicals including Cobalt, which is [are] known to the State of California to cause cancer. For more information go to www.P65Warnings.ca.gov.
-
SDS
-
Catalog
Recently Viewed
DRILLCO 215N040A 2150N Spiral Point Tap, Right Hand Cutting, M4x0.7 Thread, D4 Thread Limit, Plug Chamfer, 3 Flutes, Oxide Treated, M35 HSS-Co
Nitro-Max ANSI/ANSI taps are produced with a reduced neck to allow for longer reach, improved coolant flow, and easier chip evacuation. These taps offer higher heat resistance and red hardness over conventional High Speed Steel taps. For CNC applications.
GRINDER 5/8"-11 QUICK CHANGE NUTS-JAC33805>
Drillco 750A120 Spade Drill, 5/16 in Drill - Fraction, 0.3125 in Drill - Decimal Inch, 2XD D Cutting, Solid Carbide
Solid Carbide spade drills perform well in hard to machine materials (up to Rc 60), high strength alloys, plastic, and glass. They can be used in thin sheet metal and spotting applications. Drilling depth should not exceed 2x the drill diameter.
ITM 203HS0003 General Purpose Drill Bit, #3 Drill - Wire, 27/64 in Drill - Fraction, 0.2130 Drill - Decimal Inch, 118 deg Point Angle, M2 HSS, Black Oxide
ITM 203HS0003 General Purpose Drill Bit, #3 Drill - Wire, 27/64 in Drill - Fraction, 0.2130 Drill - Decimal Inch, 118 deg Point Angle, M2 HSS, Black Oxide
21-T SPROCKETS FOR #40 CHAIN-BRWH4021X17/6>
GP® 3028M Standard Length Socket, 3/4 in, 28 mm Hex Socket, 6 Points
