MORSE C/Tool 10-MM X 1.50 SPIRALPOINT SHEAR TAP MCT 35249
ShearTap™ 35249 2090M Oversized Spiral Point Tap, Right Hand Cutting, M10x1.5 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
-
BrandShearTap™
-
UPC686125352493
-
Manufacturer Part Number35249
-
CountryUSA
-
Finish/CoatingBlack Steam Oxide Over Nitride
-
Thread Length3/4 in
-
MaterialHSS
-
Thread LimitD6
-
Material ApplicationSteels and Stainless Steels up to 35Rc Hardness
-
Thread SizeM10x1.5
-
Chamfer TypePlug
-
Measurement SystemMetric
-
TypeOversized
-
Series2090M
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-15/16 in
- ShearTap™ offers exceptional value for high volume tapping
- The geometry is optimized for long chipping steels and stainless steels up to a hardness of 35Rc
- Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- Plug style (3 to 5 thread chamfer) is the most common chamfer used for tapping applications in through holes and blind holes with sufficient bottom clearance
- CNC reduced neck design enhances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling
- Also reduces contact between the tap and the workpiece
- Steam oxide over nitride features a hard abrasive resistant nitride base for enhanced tool life in abrasive materials including cast iron
- Steam oxide surface treatment reduces friction, loading and galling, helps retain cutting fluids, improves thread quality and extends tool life
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ 35249 2090M Oversized Spiral Point Tap, Right Hand Cutting, M10x1.5 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
VARIABLE SPEED BELT OUTSIDE CIRCUMFERENCE 37.7"-PIX3236V369 >
#8 Internal Tooth Lock Washers
FHP V-BELT (4-L-430) OUTSIDE CIRCUMFERENCE 43."-GAT2430 >
PIX BB-81 IS A DOUBLE-SIDED V-BELT, 85.6 OUTSIDE LENGTH, 21/32" TOP WIDTH, 17/32" THICKNESS 1 RIB
HEXAGONAL OR DOUBLE V BELTS ARE RECOMMENDED FOR SERPENTINE DRIVES, WHERE POWER IS TO BE TRANSMITTED FROM BOTH THE SIDES OF THE BELT. DOUBLE V BELTS ARE DESIGNED WITH SPECIAL TENSION CORD FOR MEETING DUAL POWER REQUIREMENT ALONG WITH MULTIPLE BENDS. THEY PROVIDE AMAZING TORQUE, STRENGTH, DURABILITY AND ARE USED ON DRIVES WITH MORE REVERSE BENDS.
-PIXBB81 >
5/8" 2-PIECE LEFT HAND FEMALE ROD END - QAPCFL10>
