Drillco 285A100A 2850 Spiral Point Tap, Right Hand Cutting, M10x1.5 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
-
BrandDrillco
-
UPC045996993301
-
Manufacturer Part Number285A100A
-
CountryUSA|Canada
-
Finish/CoatingUncoated
-
MaterialHSS
-
Thread LimitD6
-
Thread SizeM10x1.5
-
Chamfer TypePlug
-
Through Coolant (Yes/No)Yes
-
Measurement SystemMetric
-
Series2850
-
Number of Flutes3
-
Cutting DirectionRight Hand
- Available in plug geometry
- Bright finish for added lubricity
- Spiral point can be used with both tap wrenches and reversible power tools
- Square shank for use with standard sized tap wrenches
- Bright finish for added lubricity
- Spiral point can be used with both tap wrenches and reversible power tools
- Square shank for use with standard sized tap wrenches
-
UNSPSC27112806
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
Drillco 285A100A 2850 Spiral Point Tap, Right Hand Cutting, M10x1.5 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
NICKEL COAT HOOKS--CARD OF 2-NTL192781 >
Browning® 1045491 VP Series Type 2 Variable Pitch Sheave, 7/8 in Finished Bore, 5.35 in OD, 1 Groove, 3.9 to 4.7 in (3L)/4.2 to 5.2 in (A/4L)/4.4 to 5.4 in (B/5L) Dia Pitch, 3/4 to 1-1/8 in W Face
The principle of a variable pitch sheave is that the threaded angular faced discs forming the V-shaped groove in which the belt rides are movable. VP sheaves consist of a male with a threaded barrel, and a female with a threaded bore. The male section with threaded barrel has flat surfaces at 180 deg increments that allow a flat surface for the setscrew to mate with. When the discs are moved toward each other, the belt rides higher in the groove and the pitch diameter of the sheave is larger which increases the driven speed. When the discs are moved away from each other, the belt rides lower and the pitch diameter is smaller decreasing the driven speed. The common term for this speed adjustment is called number of turns open from closed position.
MORSE® 33005 2047 General Purpose Standard Spiral Point Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
DRILLCO 21PS124C 2100PS Super High Performance Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral point tap improves thread quality, and aids in chip evacuation.
10-GALLON WET/DRY SHOP VACUUM/CLEANER - JWH379611>

