ShearTap™ 34408 2090 Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
ShearTap™ 34408 2090 Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
-
BrandShearTap™
-
UPC686125344085
-
Manufacturer Part Number34408
-
CountryUSA
-
Finish/CoatingBlack Steam Oxide Over Nitride
-
Thread Length3/8 in
-
MaterialHSS
-
Thread LimitH3
-
Material ApplicationSteels and Stainless Steels up to 35Rc Hardness
-
Thread Size#8-32
-
Thread StandardUNC
-
Chamfer TypePlug
-
Measurement SystemImperial
-
Series2090
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-1/8 in
- ShearTap™ offers exceptional value for high volume tapping
- The geometry is optimized for long chipping steels and stainless steels up to a hardness of 35Rc
- Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- Plug style (3 to 5 thread chamfer) is the most common chamfer used for tapping applications in through holes and blind holes with sufficient bottom clearance
- CNC reduced neck design enhances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling
- Also reduces contact between the tap and the workpiece
- Steam oxide over nitride features a hard abrasive resistant nitride base for enhanced tool life in abrasive materials including cast iron
- Steam oxide surface treatment reduces friction, loading and galling, helps retain cutting fluids, improves thread quality and extends tool life
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ 34408 2090 Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
ShearTap™ 34408 2090 Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
Proto® TorquePlus™ J4714T Standard Length Socket, Imperial, 1/4 in Square Drive, 7/16 in
Proto® TorquePlus™ J4714T Standard Length Socket, Imperial, 1/4 in Square Drive, 7/16 in
Milwaukee® 49-22-0071 Universal Flat Boring Bit Set, 6 Pieces, For Use With 48-28-3350 12 in Bit Extension, Carbon Steel
Bore small, clean holes at any angle in a variety of materials with the Milwaukee® 6-piece 6 in. universal flat boring bit set. These premium quality flat boring bits are made of heat-treated high carbon steel, so the drill points and cutting edges can be resharpened for cost savings and long life. Bore clean, fast holes at any angle in wood, plastic, plywood and Formica. These bits offer a 6 in. drilling depth but can be used with a 12 in. extension (48-28-3350) for extended deep-hole drilling. 3/16 in. shank diameter. The set consists of six of the most popular size bits (3/8 in., 1/2 in., 5/8 in., 3/4 in., 7/8 in. and 1 in.) in a carrying case.
LIGHT GRAY POLY FLOOR & DECK-GALLON-BLP5082GAL >
Proto® TorquePlus™ J07532M Standard Length Socket, Metric, 3/4 in Square Drive, 32 mm
Proto® TorquePlus™ J07532M Standard Length Socket, Metric, 3/4 in Square Drive, 32 mm
RIDGID® 48215 Bolt Die, 1/4 in Conduit/Pipe, 1/4-20 UNC Thread, Right Thread, For Use With 504A, 711, 811A, 815A, 816, 817 and 911 Universal Die Heads, HSS
RIDGID® 48215 Bolt Die, 1/4 in Conduit/Pipe, 1/4-20 UNC Thread, Right Thread, For Use With 504A, 711, 811A, 815A, 816, 817 and 911 Universal Die Heads, HSS
