MORSE® 92532 2070G General Purpose Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
MORSE® 92532 2070G General Purpose Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
-
BrandMORSE®
-
UPC686125925321
-
Manufacturer Part Number92532
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length3/4 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size#8-32
-
Thread StandardGround/UNC
-
Chamfer TypePlug
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2070G
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Overall Length2-1/8 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- TiN titanium nitride is an excellent coating for machining a wide variety of materials at greatly increased speeds and feeds
- Increases tool surface hardness, lubricity and heat resistance and resists chip welding
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 92532 2070G General Purpose Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
MORSE® 92532 2070G General Purpose Spiral Point Tap, Right Hand Cutting, #8-32 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
2-PIECE UTILITY KNIFE SETS-TABUF2 >
GP® 4066R Standard Length Socket, 1 in, 2-1/16 in Hex Socket, 6 Points
Splitting Maul, 8 lb Head, Carbon Steel Head, Wood Handle, 34 in OAL
#2 1/4" SQUARE RECESS HEX POWER DRIVE, 1/8" X 1-15/16"-APX9542X >
Milwaukee® 48-20-5150 Heavy Duty Thick Wall Core Bit, 3-1/2 in Drill - Fraction, 3.5 in Drill - Decimal Inch, Carbide
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in.. the inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) Spline drive shank must be used to drive the core bit. Use 48-20-5199 center pin and 48-20-5173 guide plate for positioning and starting the hole. Thick wall core bits are available from 1 in. to 6 in. diameters. See thin wall core bits for less expensive drilling in new concrete and/or smaller hammers.

