MORSE C/Tool 7/16"-20 SAE SPIRAL POINT PLUG TAP MCT 33073
MORSE® 33073 2047X General Purpose Standard Spiral Point Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
-
BrandMORSE®
-
UPC686125330736
-
Manufacturer Part Number33073
-
CountryUSA
-
Finish/CoatingBlack Steam Oxide Over Nitride
-
Thread Length1-7/16 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size7/16-20
-
Thread StandardGround/UNF
-
Chamfer TypePlug
-
Measurement SystemImperial
-
TypeGeneral Purpose Standard
-
Series2047X
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length3-5/32 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- Black oxide increases wear resistance, reduces galling and chip welding, improves chip flow and increases lubricant retention
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 33073 2047X General Purpose Standard Spiral Point Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Black Steam Oxide Over Nitride, HSS
Browning® 1297589 Spring Clip Connecting Link, 40 Chain, 1/2 in Pitch, 0.695 in OAW, 0.156 in Dia Pin, Steel
MORSE® 32707 2046 Straight Flute Hand Tap Set, Right Hand Cutting, Bottoming/Plug/Taper Chamfer, H3 Thread Limit
Rust-Oleum 1-GALLON LIQUID RUST REFORMER RUS 3575-402
Stop rust in its tracks with Rust-Oleum High Performance 3575 System Rust-Reformer. This water-based coating bonds with rusty metal and instantly transforms it into a non-rusting surface. No need to sand down to bare metal - simply apply directly onto rust.
#505 2" BOX ED STEEL HINGES >(EA)-NTL140368 >
28 FT 250 LB TYPE-1 FIBERGLASS EXTENSION LADDER -WERD60282 >
