MORSE C/Tool 7/16"-20 SAE S/POINT PLUG TAPS MCT 33036
MORSE® 33036 2047 General Purpose Standard Spiral Point Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125330361
-
Manufacturer Part Number33036
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length1-7/16 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size7/16-20
-
Thread StandardGround/UNF
-
Chamfer TypePlug
-
Measurement SystemImperial
-
TypeGeneral Purpose Standard
-
Series2047
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length3-5/32 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 33036 2047 General Purpose Standard Spiral Point Tap, Right Hand Cutting, 7/16-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
3" X 1/32" X 1/4" CUTOFF WHEEL-ECU76500 >
Lasco® Fittings, Inc's comprehensive line of PVC injection molded fittings offers a variety of configurations in sizes 3/8 in through 12 in. SCH 80/XH fittings are manufactured to ASTM D 2467.
MORSE® 33046 2047 General Purpose Standard Spiral Point Tap, Right Hand Cutting, 5/8-11 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Bright, HSS
Anvil® 0318900560 FIG 1124 Standard Pipe Cap, 3/4 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
