MORSE C/Tool 4-48" SPIRAL POINT PLUG TAPS MCT 34018
MORSE® 34018 2070 General Purpose Standard Spiral Point Tap, Right Hand Cutting, #4-48 Thread, H2 Thread Limit, Plug Chamfer, 2 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125340186
-
Manufacturer Part Number34018
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length9/16 in
-
MaterialHSS
-
Thread LimitH2
-
Thread Size#4-48
-
Thread StandardGround/UNF
-
Chamfer TypePlug
-
Measurement SystemImperial
-
TypeGeneral Purpose Standard
-
Series2070
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Overall Length1-7/8 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
| Competitor Name | Cross-Reference Number |
|---|---|
| Berkshire eSupply | MT3634018 |
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 34018 2070 General Purpose Standard Spiral Point Tap, Right Hand Cutting, #4-48 Thread, H2 Thread Limit, Plug Chamfer, 2 Flutes, Bright, HSS
PIX A58 IS A CLASSICAL V-BELT 60" OUTSIDE LENGTH, 1/2" TOP WIDTH, 5/16" THICKNESS, 1 RIB
OIL RESISTANT, ANTISTATIC, MAXIMUM BELT LINEAR SPEED UP TO 30M/SEC, INDUSTRIAL BELT TYPE, PRIMARILY USED AS REPLACEMENT ON INDUSTRIAL DRIVES. THE CLASSICAL BELTS ARE RECOMMENDED IN SPECIAL APPLICATIONS SUCH V-FLAT DRIVES
-PIXA58 >
ADS® 0462AA Clay Adapter, For Use With Single Wall Pipe, 4 in, HDPE, Domestic
ADS® 0462AA Clay Adapter, For Use With Single Wall Pipe, 4 in, HDPE, Domestic
ITM 207SP0036 Heavy Duty Drill Bit, #36 Drill - Wire, 0.1065 Drill - Decimal Inch, 135 deg Point Angle, M2 HSS, Black Oxide
#120 HEAVY COTTERED ROLLER CHAIN-BRW120HCP10FTCH >
BBI 898444 Wood Screw, #12, 2 in OAL, Flat Head, Phillips® Drive, Zinc CR+3
