ShearTap™ 94426 2090G Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
ShearTap™ 94426 2090G Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
-
BrandShearTap™
-
UPC686125944261
-
Manufacturer Part Number94426
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length3/4 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size3/8-16
-
Thread StandardUNC
-
Chamfer TypePlug
-
Measurement SystemImperial
-
Series2090G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-15/16 in
- ShearTap™ offers exceptional value for high volume tapping
- The geometry is optimized for long chipping steels and stainless steels up to a hardness of 35Rc
- Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- Plug style (3 to 5 thread chamfer) is the most common chamfer used for tapping applications in through holes and blind holes with sufficient bottom clearance
- CNC reduced neck design enhances chip evacuation and cutting fluid flow to the cutting teeth for reduced friction, heat and galling
- Also reduces contact between the tap and the workpiece
- TiN - titanium nitride is an excellent coating for machining a wide variety of materials at greatly increased speeds and feeds
- Increases tool surface hardness, lubricity and heat resistance and resists chip welding
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ 94426 2090G Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
ShearTap™ 94426 2090G Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
Leviton® 275-T Angled Cable Mount Dual Power Grounding Straight Blade Plug, 125/250 VAC, 30 A, 50 A, 3 Poles, 4 Wires, Black
Leviton® offers a large selection of 15, 20, 30 and 50 A commercial grade straight blade plugs and connectors, available in a wide variety of features. These rugged performers are moisture, chemical and abuse resistant and they are ideal for indoor and outdoor use. Our EPTR rubber backed plugs and connectors stand up to rough use, protecting against dirt and moisture. The deep slotted, backed out terminal screws draw back wire clamps securely over stripped leads for maximum conductivity.
DRILLCO 225N124C 2250N Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiCN Coated, M35 HSS-Co
Nitro-Max taps are manufactured to DIN/ANSI specifications, with DIN lengths to allow for longer reach and deeper threading in a single pass. TiCN coating helps to hold sharp edges and reduces the coefficient of friction. For CNC applications.
MORSE® 60850 2095C High Performance Spiral Point Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiCN Coated, HSS-PM
MORSE® 60850 2095C High Performance Spiral Point Tap, Right Hand Cutting, 1/4-20 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, TiCN Coated, HSS-PM
Drillco 285A040A 2850 Spiral Point Tap, Right Hand Cutting, M4x0.7 Thread, D4 Thread Limit, Plug Chamfer, 2 Flutes, Bright, HSS
The angular flutes at the front end of these taps propel the chips ahead of the tap. This reduce loading and clogging in the flutes. Spiral Point taps are ideal for production tapping thru holes.
RIDGID® 37815 Manual Threader Pipe Die, 1/4 in Conduit/Pipe, 1/4-18 NPT Thread, Right Thread, For Use With OO-R, 11-R, 12-R, O-R, Ratchet Threaders and 30A, 31A 3-Way Pipe Threaders, Alloy Steel
RIDGID® 37815 Manual Threader Pipe Die, 1/4 in Conduit/Pipe, 1/4-18 NPT Thread, Right Thread, For Use With OO-R, 11-R, 12-R, O-R, Ratchet Threaders and 30A, 31A 3-Way Pipe Threaders, Alloy Steel
