DRILLCO 21PS124C 2100PS Super High Performance Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral point tap improves thread quality, and aids in chip evacuation.
-
BrandDrillco
-
UPC045996892321
-
Manufacturer Part Number21PS124C
-
CountryUSA|Canada
-
Finish/CoatingUncoated
-
Thread Length0.748 in
-
MaterialHSS
-
Thread LimitH3
-
Material ApplicationStainless Steel
-
Thread Size3/8-16
-
Thread StandardUNC
-
Chamfer TypePlug
-
Through Coolant (Yes/No)Yes
-
Measurement SystemImperial
-
TypeSuper High Performance
-
Series2100PS
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-15/16 in
- Available in plug geometry
- Spiral point is designed to eject chips through the bottom of the hole
- Bright finish for added lubricity
- Reduced neck for better clearance in deeper holes
- Spiral point can be used with both tap wrenches and reversible power tools
- Reduced neck for better clearance in deeper holes
- Spiral point can be used with both tap wrenches and reversible power tools
-
UNSPSC27112806
-
Package Description1/PK
-
SDS
-
Catalog
Recently Viewed
DRILLCO 21PS124C 2100PS Super High Performance Spiral Point Tap, Right Hand Cutting, 3/8-16 Thread, H3 Thread Limit, Plug Chamfer, 3 Flutes, Uncoated, HSS
These taps are designed for machine tapping in a wide range of material groups, including difficult to machine materials such as stainless steel. The Nitro multi-application spiral point tap improves thread quality, and aids in chip evacuation.
5/8" X 10" PULLEY MANDRELS-JWH344746>
5-WIRE FRAME. 1/4" ROD WITH METAL FERRULE. THREADED PLASTIC HANDLE TO ACCOMMODATE EXTENSION POLE
-JWH788268 >
a heavy-duty impact socket adapter. It allows you to step down or convert a larger drive tool to a smaller socket size.
ASP-2932-S Industry Standard Clamping Collar, 2-Piece Construction, 2-15/16 in ID x 4-1/4 in OD x 7/8 in W, Steel
Black Oxide Plated Steel Two-Piece Clamping Collar. Design fully engages the shaft without marring. Easily installed where major disassembly would otherwise be required. Greater axial holding power than set screw or one-piece clamping collars. Effective on hard & soft shafts.
1/8" -MALE PIPE THREADX2-1/2" GALVANIZED NIPPLE-FIT1/8X21/2GN >
