MORSE® 92501 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 1/4-28 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
MORSE® 92501 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 1/4-28 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
-
BrandMORSE®
-
UPC686125925017
-
Manufacturer Part Number92501
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length1 in
-
MaterialHSS
-
Thread LimitH3
-
Thread Size1/4/2028
-
Thread StandardGround/UNC
-
Chamfer TypePlug
-
Measurement SystemImperial
-
TypeGeneral Purpose
-
Series2047G
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Overall Length2-1/2 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- TiN - titanium nitride is an excellent coating for machining a wide variety of materials at greatly increased speeds and feeds
- Increases tool surface hardness, lubricity and heat resistance and resists chip welding
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 92501 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 1/4-28 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
MORSE® 92501 2047G General Purpose Spiral Point Tap, Right Hand Cutting, 1/4-28 Thread, H3 Thread Limit, Plug Chamfer, 2 Flutes, TiN Coated, HSS
MORSE® 31210 1195 Adjustable Round Split Threading Die, 7/8-14 UNF Thread, 5/8 in THK, 2 in OD Die, Carbon Steel
MORSE® 31210 1195 Adjustable Round Split Threading Die, 7/8-14 UNF Thread, 5/8 in THK, 2 in OD Die, Carbon Steel
Proto® J86A1/2X12S2 Cold Chisel, 5/8 in S2 Tool Steel Flat Tip, 12 in OAL, 5/8 in W Blade
Proto® J86A1/2X12S2 Cold Chisel, 5/8 in S2 Tool Steel Straight Tip, 12 in OAL, 5/8 in W Blade
Proto® TorquePlus™ J4709M Standard Length Socket, Metric, 1/4 in Square Drive, 9 mm
MORSE® 31574 2195M Adjustable Round Split Threading Die, M18x2.5 Thread, 1/2 in THK, 1-1/2 in OD Die, HSS
MORSE® 31574 2195M Adjustable Round Split Threading Die, M18x2.5 Thread, 1/2 in THK, 1-1/2 in OD Die, HSS
Milwaukee® 48-20-5045 Heavy Duty Thin Wall Core Bit, 3 in Drill - Fraction, 3 in Drill - Decimal Inch
Milwaukee's core bits are ideal for large hole drilling where depth is relatively shallow. The core bit cuts a Kerf only. The usable depth of thick wall core bits is 4-3/8 in. The inside core must be removed by the operator before deeper drilling can be accomplished. The thick wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 in. extension is available to allow for the deeper holes to be drilled. The appropriate (Dependant on the diameter) SDS Plus drive shank must be used to drive the core bit. Use 48-20-6155 center pin and 48-20-6159 guide plate for positioning and starting the hole. Thin wall core bits are available from 1 in. to 6 in. diameters. See thick wall core bits for cured concrete and/or larger hammers.
