MORSE C/Tool 8-MM X 1.00 SPIRAL-POINT PLUG TAPS MCT 38520
MORSE® 38520 7501 General Purpose Spiral Point Tap, M8x1 Thread, D5 Thread Limit, Plug Chamfer, 2 Flutes, Bright, HSS
-
BrandMORSE®
-
UPC686125385200
-
Manufacturer Part Number38520
-
CountryUSA
-
Finish/CoatingBright
-
Thread Length1-1/8 in
-
MaterialHSS
-
Thread LimitD5
-
Thread SizeM8x1
-
Thread StandardGround
-
Chamfer TypePlug
-
Measurement SystemMetric
-
TypeGeneral Purpose
-
Series7501
-
Number of Flutes2
-
Overall Length2-23/32 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 38520 7501 General Purpose Spiral Point Tap, M8x1 Thread, D5 Thread Limit, Plug Chamfer, 2 Flutes, Bright, HSS
Anvil® 0310030804 FIG 1105 Straight Pipe Tee, 2 in Nominal, FNPT End Style, 150 lb, Malleable Iron, Black Oxide, Domestic
Anvil International offers the broadest line of malleable iron fitting sizes in both black and galvanized finishes. Every fitting is manufactured and tested to meet Anvil's strict quality standards. All Anvil Class 150 Malleable Iron Fittings conform to ASME B16.3 and unions conform to ASME B16.39. All elbows and tees 3/8 in (10 DN) and larger are 100% gas tested at a minimum of 100 PSI (6.9 bar).
National Hardware® N184-556 N184 V520 Spring Hinge, 30 lb, Cold Rolled Steel, Brass
MORSE® 38508 7501 General Purpose Spiral Point Tap, M7x1 Thread, D5 Thread Limit, Plug Chamfer, 2 Flutes, Bright, HSS
ShearTap™ 94563 2090G Oversized Spiral Point Tap, Right Hand Cutting, 7/16-14 Thread, H11 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
5" CUTTING WHEEL CW A30-O-MTB16738 >
