MORSE C/Tool 12-MM X 1.75 SPIRAL POINT PLUG TAP MCT 98511
MORSE® 98511 7501G General Purpose Spiral Point Tap, M12x1.75 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
-
BrandMORSE®
-
UPC686125985110
-
Manufacturer Part Number98511
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length1-21/32 in
-
MaterialHSS
-
Thread LimitD6
-
Thread SizeM12x1.75
-
Thread StandardGround/UNC
-
Chamfer TypePlug
-
Measurement SystemMetric
-
TypeGeneral Purpose
-
Series7501G
-
Number of Flutes3
-
Overall Length3-3/8 in
- Spiral point taps are designed for machine tapping in through holes in a wide variety of materials
- The point ejects the chips ahead of the tap, eliminating chip disposal problems and thread damage
- Shallower flutes also result in greater tap core strength allowing for higher cutting speeds
- TiN - titanium nitride is an excellent coating for machining a wide variety of materials at greatly increased speeds and feeds
- Increases tool surface hardness, lubricity and heat resistance and resists chip welding
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 98511 7501G General Purpose Spiral Point Tap, M12x1.75 Thread, D6 Thread Limit, Plug Chamfer, 3 Flutes, TiN Coated, HSS
1-3/8" GR-8 Split Lock Washers
Milwaukee® 48-20-4405 4-Cutter Rotary Hammer Drill Bit, 1-1/4 in Drill Bit, 3/4 in Spline Shank, 31 in D Cutting, Carbide Cutting Edge, 36 in OAL
Milwaukee®’s Spline 4-cutter rotary hammer drill bits feature a 4-cutter 4 x 90° tip geometry to avoid lock up in rebar, patented rebar chamfers for increased durability, and a high volume flute for fast debris removal. Used for drilling holes in brick, block, concrete, and reinforced concrete.
Milwaukee® 48-20-4419 4-Cutter Rotary Hammer Drill Bit, 2 in Drill Bit, 3/4 in Spline Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
Four cutter Spline bits have a series of 12 Spline that slide into an equal but opposite set of Spline in the drive system of the Spline drive hammer. This positive engagement of Spline to Spline allows maximum transmission of energy from the hammer to the bit. Superior quality Carbide nibs are vacuum brazed to a heat treated steel body resulting in four cutting edges which pulverize the concrete as the bit turns and pounds the work surface. Available from 5/8 in. to 1-1/2 in. diameters. 4 cutter style bits are also available in metric (from 16 mm to 38 mm). One per package.
BUSHINGS-BLK12518>
1/8" X 18" SURFACE CONDITION BELT-ARC630030182>
