MORSE C/Tool 7/16"-20 HS SPIRAL FL SHEAR TAPS MCT 34480
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125344801
-
Manufacturer Part Number34480
-
CountryUSA
-
Finish/CoatingBlack Steam Oxide
-
Thread Length0.591 in
-
MaterialHSS
-
Thread LimitH3
-
Material ApplicationSteels and Stainless Steels
-
Thread Size7/16-20
-
Thread StandardUNF
-
Chamfer TypeSemi-Bottoming
-
Class of FitH3
-
Measurement SystemImperial
-
TypeOversized
-
Series2091
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length3-5/32 in
- Steam oxide over nitride resists chip welding, increases lubricity and helps to retain cutting fluid
- CNC reduced neck design
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
JASON 2R5VX900 UNIMATCH BANDED DEEP WEDGE V-BELT, 5V SECTION, NATURAL RUBBER, 90" LONG, 2 RIBS, 5/8" TOP WIDTH, 17/32" THICK
OIL & HEAT RESISTANT-DURABILITY IN TOUGH ENVIRONMENTS. A MORE NARROW, DEEP WEDGE SHAPE WITH MORE EFFICIENT LOAD CARRYING CHARACTERISTICS AND HIGHER POWER CAPABILITY ALLOWS FOR SMALLER, MORE COMPACT DRIVES. THESE BELTS FEATURE THE UNIMATCH CONSTRUCTION. THIS ELIMINATED BELT SET MATCHING WITH ITS MULTIPLE STOCKING AND BELT WASTAGE PROBLEMS-JAS3VX900 >
9" X 11" VERY FINE SANDPAPER--PACK OF 5-JWH351559 >
MORSE® 59820 5970 General Purpose Premium Carbide Burr, Flat End, Cylindrical Head, 7/16 in Dia Head, 1 in L of Cut, 2-3/16 in OAL, Single Cut
Proto® JSCVM13T Reversible Spline Combination Wrench, 13 mm Wrench, 12 Points, 15 deg Offset, 7 in OAL, Forged Steel, Full Polished, ASME Specified
Southwire® 13054255 Type UF-B Underground Feeder Cable With Grounding Wire, 600 V AC, (2) 14 AWG Copper Conductor, 250 ft L
Southwire® copper UF-B cable is generally used as feeder to outside post lamps, pumps, and other loads or apparatus fed from a distribution point in an existing building as specified in the 2011 National Electrical Code. UF-B cable may be used underground, including direct burial. Multiple conductor UF-B cable may be used for interior branch circuit wiring in residential or agricultural buildings at conductor temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified by the National Electrical Code. UF-B can be used in applications permitted for NMC in Section 334.10(B) of the National Electrical Code. Voltage rating for UF-B cable is 600 volts.
