MORSE C/Tool 7/16"-14 HS SPIRAL FLUTE SHEAR TAP MCT 34478
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125344788
-
Manufacturer Part Number34478
-
CountryUSA
-
Finish/CoatingBlack Steam Oxide
-
Thread Length0.591 in
-
MaterialHSS
-
Thread LimitH3
-
Material ApplicationSteels and Stainless Steels
-
Thread Size7/16-14
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH3
-
Measurement SystemImperial
-
TypeOversized
-
Series2091
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length3-5/32 in
- Steam oxide over nitride resists chip welding, increases lubricity and helps to retain cutting fluid
- CNC reduced neck design
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
3/16" X 1-1/4" Cotter Pins
Milwaukee® 2357-20 M18™ PACKOUT™ Portable Light/Charger With 2.1 A USB Charging, LED Lamp, 18 V, 3 Heads
The MILWAUKEE® M18™ Flood Light/Charger w/ PACKOUT™ Compatibility provides all day multi-directional lighting and charging. This portable light delivers 3000 Lumens of TRUEVIEW™ High Definition Output and is fully compatible with the PACKOUT™ Modular Storage System. Three independent rotating light heads allow for complete control over lighting direction whether using it on a PACKOUT™ stack or as a dedicated light off the stack. Manage output and runtime on this portable work light with three different modes (All Lights, Main Panel, or Back/Front Lights), each including high, medium, and low settings to achieve up to 31 hours of runtime with one M18™ REDLITHIUM™ XC 5.0 Battery. The AC input allows for all day runtime and M18™ Battery charging. Charge devices with the 2.1AMP USB output and store small items inside the storage compartment.
7/16" X 4" USS Stainless Steel Hex Head Capscrew
Drillco 800A25 Jobber Length Drill Set, 1 mm Min Drill Bit, 13 mm Max Drill Bit, 135 deg Drill Point Angle, 25 Pieces, HSS, Oxide Treated
Heavy-duty construction makes these drills suitable for more demanding applications. Designed for efficient drilling in stainless steel and tougher ferrous materials. The 135º split point reduces the thrust requirements and minimizes walking.
