MORSE C/Tool #6-32 SPIRAL 3-FL SEMI-BOTTOM TAP MCT 94592
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125945923
-
Manufacturer Part Number94592
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length0.23 in
-
MaterialHSS
-
Thread LimitH7
-
Material ApplicationSteels and Stainless Steels
-
Thread Size#6-32
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH7
-
Measurement SystemImperial
-
TypeOversized
-
Series2091G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2 in
- TiN coating increases hardness and lubricity for improved thread quality, higher speeds and longer tool life
- Primarily designed for tapping through holes
- The spiral flutes draw the chips out of the hole
- CNC reduced neck design
- Oversize taps are mainly used for parts that will be plated or heat treated after tapping
- Also used in materials that tend to shrink after tapping
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
9/16" X 6" MASONRY DRILLBIT-JWH363308 >
BEVERAGE HOLDER MADE OF CHROME-PLATED BRASS WITH FOAM THERMAL INSULATOR AND 2 MOUNTING BRACKETS, SWINGS FREELY TO PREVENT SPILLS AND IS EASILY DETACHABLE. FASTEN WITH NO. 8 SCREWS.
-JWH573908 >
768642 DO-IT-BEST/BEST GARDEN 5/8" OR 3/4" MALE METAL HOSE END MENDER HOSE COUPLING
POSI-CLAMP. PATENTED IMPACT-RESISTANT CLAMP DESIGN. NON CORRODING HIGH-GRADE STAINLESS STEEL SCREWS WILL NOT STRIP WHEN TIGHTENED. LEAKPROOF AND REUSABLE. ALL THAT IS NEEDED FOR REPAIR IS A KNIFE AND SCREWDRIVER.
-JWH768642 >
3/16" X 3" FAST SPIRAL MASONRY BIT-JWH352530 >
714240 DO-IT-BEST/HILLMAN THE ANCHOR CENTER 3/16" X 4-1/2" TAPCON MASONRY DRILL BIT
THE ANCHOR IS USED WITH TAPCON CONCRETE SCREW ANCHORS. USED FOR DRILLING PILOT HOLES IN MASONRY INCLUDING CONCRETE, BLOCK AND BRICK. TIGHT BIT TOLERANCE PROVIDES MAXIMUM ANCHOR PERFORMANCE
-JWH714240 >
