MORSE C/Tool 3/8"-24 3-FL TIN SEMI-BOTTOM TAP MCT 94477
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125944773
-
Manufacturer Part Number94477
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length0.551 in
-
MaterialHSS
-
Thread LimitH4
-
Material ApplicationSteels and Stainless Steels
-
Thread Size3/8-24
-
Thread StandardUNF
-
Chamfer TypeSemi-Bottoming
-
Class of FitH4
-
Measurement SystemImperial
-
TypeOversized
-
Series2091G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2-15/16 in
- TiN coating increases hardness and lubricity for improved thread quality, higher speeds and longer tool life
- CNC reduced neck design
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
Apex® 320-3X Power Drive Bit, 6F-8R Slotted Point, 1-15/16 in OAL, Steel
Browning® 765271 VER 200 Standard Duty Straight Bore Ball Bearing Insert With Seal Flinger and Snap Ring, 1-1/4 in Dia Bore, 3.078 in OD, 1 Rows, 1.688 in W, 5782 lb Dynamic/3493 lb Static Load
Browning® VER bearings feature black oxide treated inner and outer rings and extended inner race bearing with ball riding nylon retainer. Shaft lock is achieved by 120 deg spaced diamond faceted setscrew locking. The contact seal, with black oxide treated flinger provides a good balance between contaminant resistance, grease loss and friction.
BBI 101163 Socket Set Screw, #6-32, 7/8 in L, Cup Point, Alloy Steel
Crescent® CCP8V 2-in-1 Combo Lineman's Plier, 20 to 10 AWG THK Max Wire, 1-1/16 in W Forged Alloy Steel Jaw, 8-1/4 in OAL
The Crescent 2-in-1 Combo Plier features an innovative design allowing it to do the job of two tools without sacrificing performance. The plier features two sets of jaws - a linesmen head and a wire stripper head - between the handles. The slide lock switch locks the handles in place for the desired plier head and makes switching between the two heads quick and easy.
Bussmann Bullet™ ECNR100 Current Limiting Time Delay Fuse, 100 A, 250 V AC/125 V DC, 200 kAIC Interrupt, RK5 Class, Cylindrical Body
Edison's UL Class RK5 dual-element, time-delay fuses provide economical solutions to overcurrent protectioni. Available in both 250Vac and 600Vac, with 200kA RMS Sym interrupting ratings and sizes ranging from 0 to 600 amp.
