ShearTap™ 94608 2091G Oversized Spiral Flute Tap, Right Hand Cutting, 3/8-16 Thread, H7 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiN Coated, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125946081
-
Manufacturer Part Number94608
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length0.55 in
-
MaterialHSS
-
Thread LimitH7
-
Material ApplicationSteels and Stainless Steels
-
Thread Size3/8-16
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH7
-
Measurement SystemImperial
-
TypeOversized
-
Series2091G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2.94 in
- TiN coating increases hardness and lubricity for improved thread quality, higher speeds and longer tool life
- Primarily designed for tapping through holes
- The spiral flutes draw the chips out of the hole
- CNC reduced neck design
- Oversize taps are mainly used for parts that will be plated or heat treated after tapping
- Also used in materials that tend to shrink after tapping
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ 94608 2091G Oversized Spiral Flute Tap, Right Hand Cutting, 3/8-16 Thread, H7 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiN Coated, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
Proto® TorquePlus™ J1216M Combination Wrench, 16 mm, 12 Points, 15 deg Offset, 9-35/64 in OAL, Alloy Steel, Full Polished, ASME B107.100
Proto® TorquePlus™ J1216M Combination Wrench, 16 mm, 12 Points, 15 deg Offset, 9-35/64 in OAL, Alloy Steel, Full Polished, ASME B107.100
Proto® J718B Non-Insulated Standard Wrench, 2-1/16 in Wrench, Polished Chrome, 18-7/32 in OAL, Alloy Steel Jaw, Alloy Steel Body, ASME B107.113, Alloy Steel
Proto® J718B Non-Insulated Standard Wrench, 2-1/16 in Wrench, Polished Chrome, 18-7/32 in OAL, Alloy Steel Jaw, Alloy Steel Body, ASME B107.113, Alloy Steel
Individually tested to exceed the IEC 60900 and ASTM F1505 standards, for insulated tools, and clearly marked with the official 1000-volt rating symbol.
Two layers of insulation provide protection against electric shock.
Thick, exceptionally tough, high-dielectric white inner coating is bonded to the tool.
A flame retardant, impact-resistant, bright orange outer coating.
Hollow shafts make it possible to work on stacked circuit boards or other long bolt applications.
Tip-Ident quickly identifies nut driver size.
Cushion-Grip™ handles for greater torque and comfort.
Proto® TorquePlus™ J1234-T500 Anti-Slip Design Combination Wrench, 1-1/16 in Wrench, 12 Points, 15 deg Offset, 15-1/4 in OAL, Alloy Steel, Full Polished, ASME B107.100
Proto® TorquePlus™ J1234-T500 Anti-Slip Design Combination Wrench, 1-1/16 in Wrench, 12 Points, 15 deg Offset, 15-1/4 in OAL, Alloy Steel, Full Polished, ASME B107.100
5/8" ALLOY CLEVIS GRAB HOOK1027347-CROA3305/8 >
