ShearTap™ 94598 2091G Oversized Spiral Flute Tap, Right Hand Cutting, #10-32 Thread, H7 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiN Coated, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125945985
-
Manufacturer Part Number94598
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length0.35 in
-
MaterialHSS
-
Thread LimitH7
-
Material ApplicationSteels and Stainless Steels
-
Thread Size#10-32
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH7
-
Measurement SystemImperial
-
TypeOversized
-
Series2091G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2.38 in
- TiN coating increases hardness and lubricity for improved thread quality, higher speeds and longer tool life
- Primarily designed for tapping through holes
- The spiral flutes draw the chips out of the hole
- CNC reduced neck design
- Oversize taps are mainly used for parts that will be plated or heat treated after tapping
- Also used in materials that tend to shrink after tapping
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ 94598 2091G Oversized Spiral Flute Tap, Right Hand Cutting, #10-32 Thread, H7 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiN Coated, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
Mayhew™ 37345 Screw Extractor Set, 1/8 to 1-1/16 in, 10 Pieces, Steel
3/8" CLEVIS GRAB HOOKS, DESIGNED SPECIFICALLY FOR GRADE 43 CHAIN & ARE HELD ONTO THE CHAIN BY BOLT & COTTER PIN ASSEMBLY, ZINC FINISH-DIX61393 >
Proto® TorquePlus™ J1236ASD Anti-Slip Design Combination Wrench, 1-1/8 in Wrench, 12 Points, 15 deg Offset, 15-7/8 in OAL, Alloy Steel, Satin, ASME B107.100
Proto® TorquePlus™ J1236ASD Anti-Slip Design Combination Wrench, 1-1/8 in Wrench, 12 Points, 15 deg Offset, 15-7/8 in OAL, Alloy Steel, Satin, ASME B107.100
ITM 309BP5664 Brad Point Drill Bit, 7/8 in Dia, 8-1/8 in OAL, 3/8 in Shank
Armstrong® 25-242 Long Length Open End Combination Wrench, 1-5/16 in, 12 Points, 15 deg Offset, 20-1/8 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
Armstrong® 25-242 Long Length Open End Combination Wrench, 1-5/16 in, 12 Points, 15 deg Offset, 20-1/8 in OAL, High Alloy Steel, Satin Chrome, ASME B107.6-1994
