ShearTap™ 94596 2091G Oversized Spiral Flute Tap, Right Hand Cutting, #10-24 Thread, H7 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiN Coated, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125945961
-
Manufacturer Part Number94596
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length0.35 in
-
MaterialHSS
-
Thread LimitH7
-
Material ApplicationSteels and Stainless Steels
-
Thread Size#10-24
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH7
-
Measurement SystemImperial
-
TypeOversized
-
Series2091G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length2.38 in
- TiN coating increases hardness and lubricity for improved thread quality, higher speeds and longer tool life
- Primarily designed for tapping through holes
- The spiral flutes draw the chips out of the hole
- CNC reduced neck design
- Oversize taps are mainly used for parts that will be plated or heat treated after tapping
- Also used in materials that tend to shrink after tapping
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ 94596 2091G Oversized Spiral Flute Tap, Right Hand Cutting, #10-24 Thread, H7 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiN Coated, HSS
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
Proto® J715SC Standard Wrench, 1-1/2 in Wrench, Black Oxide, 16-3/32 in OAL, Alloy Steel Jaw, Alloy Steel Body, ASME B107.133, Alloy Steel
15 IN. ADJUSTABLE SPUD WRENCH
Irwin® Speedbor® 88807 2000 Standard Length Spade Bit, 7/16 in Dia, 6 in OAL, 5 in L Flute Flat Flute, 1/4 in Shank
No matter what wood-boring project you face, IRWIN makes a drill bit to do the job better. Whether the job requires quick, clean holes or precise finish work, there's an IRWIN bit for it. Our mark of quality is stamped on the shank of our full range of bits for every application and every need.
Proto® TorquePlus™ J1211MASD Anti-Slip Design Combination Wrench, Metric, 11 mm, 12 Points, 15 deg Offset, 6 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1211MASD Anti-Slip Design Combination Wrench, Metric, 11 mm, 12 Points, 15 deg Offset, 6 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
20A/250V 6-20-R SINGLE RECEPTACLE-LEV5503>
Proto® TorquePlus™ J1226MASD Anti-Slip Design Combination Wrench, Metric, 26 mm, 12 Points, 15 deg Offset, 14 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9
Proto® TorquePlus™ J1226MASD Anti-Slip Design Combination Wrench, Metric, 26 mm, 12 Points, 15 deg Offset, 14 in OAL, Alloy Steel, Satin, ASME B107.100, ANSI B107.9

