MORSE® 61255 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
MORSE® 61255 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
-
BrandMORSE®
-
UPC686125612559
-
Manufacturer Part Number61255
-
CountryUSA
-
Finish/CoatingTiCN Coated
-
Thread Length0.63 in
-
MaterialHSS-PM
-
Thread LimitH3
-
Material ApplicationSteels, Steel Alloys, Stainless Steels and Titanium Alloys
-
Thread Size1/2-13
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH3
-
Measurement SystemImperial
-
TypeHigh Performance
-
Series2089C
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length4.331 in
- CNC reduced neck design
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
- Powder metallurgy high speed steel premium steel engineered for hardness, wear resistance, tool, heat resistance, toughness and strength, performance under difficult cutting conditions, higher cutting speeds, increased productivity
- Titanium carbonitride coating increases wear resistance, reduces friction and galling, reduces tapping torque, improves thread quality and allows increased cutting speeds for greatly increased productivity and tool life
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsANSI Specified|DIN Rated
Recently Viewed
MORSE® 61255 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
MORSE® 61255 2089C High Performance Spiral Flute Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
Milwaukee® 49-57-2000 Annular Cutter, 2 in Dia Cutter, 2 in D Cutting, Uncoated, Threaded Shank
Drill holes up to 3X faster than twist drill bits with the Milwaukee® 2 in. threaded Steel Hawg® cutter. This long-lasting cutter features Carbide teeth and an alternating cutting pattern to cut up to a 2 in. hole depth in steel, stainless steel, cast iron or aluminum. The spring-loaded, self-ejecting pin lets you make smoother, more accurate cuts and eject the plug faster. The Steel Hawg cutter works with most electromagnetic drill presses. Use it with arbor 49-57-0030 on Milwaukee's 4262-1 magnetic drill press or arbor 49-57-0010 on Milwaukee's 4292-1 mag press. The 2 in. bit diameter has a metric thread size of M18 x 1.5 in. shank. Use the threaded Steel Hawg with a No. 3 Morse taper arbor assembly 49 to 57 - 0010.
Knipex® 00 20 08 US1 Universal Plier Set, Tongue and Groove, 3 Pieces
Leviton® 2743 3-Phase Grounding Cable Mount Locking Connector, 600 V AC, 30 A, 3 Poles, 4 Wires, Black/White
Leviton® Dustguard® line of industrial grade plugs and connectors feature rugged construction that resists impact, sunlight, chemicals and rough use. All contacts are solid 1-piece construction for superior conductivity. They are engineered to IP44 splashproof and dust tight standards. The ergonomic, fluted body design with radial gripping edge is ideal for gripping and pulling. The unique cord clamp accepts a wide range of cord sizes, providing a secure grip without damaging the cord. And, they are backed by a limited lifetime warranty.
GEARWRENCH® 9117D Open End Regular Length Combination Wrench, 17 mm Wrench, 12 Points, 0/15 deg Offset, 8.878 in OAL, Polished Chrome
GEARWRENCH® Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
Reed 05805 Universal Die, 1/2 to 3/4 in NPT Thread, 4 Pieces, Alloy
Reed used its 100+ years of die-making experience to select the best materials, methods and CNC production for its universal dies. These dies fit Reed's 5301PD power drive, Ridgid® 300, 300 compact, 535, 535 automatic, 1215, 1822-I, 1224 plus the reed R811 universal die head. Bevel dies add a chamfer to the outside edge of steel/stainless steel pipe for welding purposes. A bevel die set comes with 1 cutting segment and 3 guide segments. Reed offers alloy, high speed steel (HSS) and HSS for stainless steel universal dies in NPT or BSPT geometries. All three provide excellent threads. Alloy dies are the most economical. HSS dies last longer than alloy dies because HSS universal dies withstand high temperature without losing hardness. This feature allows them to cut faster than the alloy at room temperature. HSS for stainless steel dies are designed specially for stainless steel pipe. Use with reed Thread guard cutting oil for better and faster threads and longer die life.
