MORSE C/Tool 1/2"-13 USS SPIRAL FLUTE TAPS MCT 60946
MORSE® 60946 2096C High Performance Spiral Flute Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
-
BrandMORSE®
-
UPC686125609467
-
Manufacturer Part Number60946
-
CountryUSA
-
Finish/CoatingTiCN Coated
-
Thread Length5/8 in
-
MaterialHSS-PM
-
Thread LimitH3
-
Material ApplicationSteels, Steel Alloys, Stainless Steels, Titanium Alloys, Nickel and Nickel Base Alloys and Other Exotic Alloys
-
Thread Size1/2-13
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH3
-
Measurement SystemImperial
-
TypeHigh Performance
-
Series2096C
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length3-3/8 in
- CNC reduced neck design
- The spiral flutes draw the chips out of the hole
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
- Powder metallurgy high speed steel premium steel engineered for hardness, wear resistance, tool, heat resistance, toughness and strength, performance under difficult cutting conditions, higher cutting speeds, increased productivity
- Titanium carbonitride coating increases wear resistance, reduces friction and galling, reduces tapping torque, improves thread quality and allows increased cutting speeds for greatly increased productivity and tool life
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 60946 2096C High Performance Spiral Flute Tap, Right Hand Cutting, 1/2-13 Thread, H3 Thread Limit, Semi-Bottoming Chamfer, Right Hand Flute Direction, 3 Flutes, TiCN Coated, HSS-PM
Pass & Seymour® Turnlok® L530-R Single Locking Receptacle, 125 V AC, 30 A, 2 Poles, 3 Wires, Black
Pass & Seymour® Turnlok® L530-R Single Locking Receptacle, 125 VAC, 30 A, 2 Poles, 3 Wires, Black
American Lock® aluminum padlock. 1-1/2 in (3.8cm) wide black anodized aluminum body, 1/4 in (6 mm) chrome plated, boron alloy shackle with 1 in (2.5cm) clearance. Anodized finish suitable for lockout in food processing facilities. Corrosive resistant finish for tough environments. High visibility color plus high security. Keyed different 5-pin tumbler rekeyable cylinder. commercial boxed packaging, shelf pack quantity 6, master carton quantity 24.
Sure-Grip® quick detachable bushings are easy to install and remove. Split-through flange and taper provide a true clamp on the shaft that is equivalent to a shrink fit. All sizes except JA and QT have a set screw over the key to help maintain the bushing's position on the shaft until the cap screws are securely tightened. Versatile Sure-Grip® bushings permit the mounting of the same mating part on shafts of different diameters and the mounting of different sheaves on the same shaft using the same bushing.
First choice of professionals everywhere. With handle grip and vent valve for purging air from gun. Two-way filling, suction and cartridge. Variable stroke/variable pressure, short stroke-high pressure and long stroke-high volume.
Drillco 1000EF232 Imperial Silver and Deming Drill, 1-1/2 in Drill - Fraction, 1.5 in Drill - Decimal Inch, 1/2 in Shank, HSS
1000EF series S&D Drills with 3-flat shanks expand the size range capacity of a 1/2" portable drill chuck. Common flute and overall length for minimal adjustment during tool changes. Ideal for drilling low and medium tensile strength materials.
