MORSE C/Tool 1/2"-13 USS 3-FL TIN S/POINT TAPS MCT 94617
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
-
BrandShearTap™
-
UPC686125946173
-
Manufacturer Part Number94617
-
CountryUSA
-
Finish/CoatingTiN Coated
-
Thread Length0.63 in
-
MaterialHSS
-
Thread LimitH11
-
Material ApplicationSteels and Stainless Steels
-
Thread Size1/2-13
-
Thread StandardUNC
-
Chamfer TypeSemi-Bottoming
-
Class of FitH11
-
Measurement SystemImperial
-
TypeOversized
-
Series2091G
-
Number of Flutes3
-
Cutting DirectionRight Hand
-
Overall Length3.38 in
- TiN coating increases hardness and lubricity for improved thread quality, higher speeds and longer tool life
- Primarily designed for tapping through holes
- The spiral flutes draw the chips out of the hole
- CNC reduced neck design
- Oversize taps are mainly used for parts that will be plated or heat treated after tapping
- Also used in materials that tend to shrink after tapping
- Semi-bottoming style (2-3 thread chamfer) allows threading close to the bottom of blind holes but cuts more efficiently than standard bottoming taps due to a slightly longer chamfer which distributes the cutting load over a greater number of teeth
-
UNSPSC23241615
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
ShearTap™ offers exceptional value for high volume tapping. The geometry is optimized for long-chipping steels and stainless steels up to a hardness of 35Rc. Made with premium high speed steel with an enhanced flute design, the ShearTap™ offer great chip management, cutting edge strength and wear resistance, resulting in a high quality threads.
McGill® 0000600000 MI Series Standard Machined Separable Inner Ring With Oil Hole and Annular Groove, 3/8 in ID x 0.6245 in OD, 1.01 in OAW, Chrome Steel
Precision ground inner ring provides a hardened raceway for the rollers when used with an unhardened shaft. The ring contains an oil hole and annular groove for relubrication of the bearing and can be used with both CAGEROL® and GUIDEROL® bearings or can be utilized as a bushing in plain bearing applications.
1/16" X 5/8" Solid Dowel Pins
Starrett® GF1018 All Purpose Hand Hacksaw Blade, 1/2 in W x 10 in L Blade, High Carbon Steel Cutting Edge, High Carbon Steel Blade, 18 TPI
12-VOLT COMPACT CORDLESS BANDSAW-MWK242921XC>
