Qualtech DWTPT2-1/2 Pipe Tap, 2-1/2-8 Thread
Also called pipe taps, carbon steel NPT pipe taps are designed to clean and or re-thread damaged or jammed pipe threads. They are appropriate for threading a wide variety of materials both ferrous and nonferrous. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer NPT threads require the use of a sealer like teflon tape or pipe compound.
-
BrandQualtech
-
UPC887861076357
-
Manufacturer Part NumberDWTPT2-1/2
-
CountryUSA
-
Finish/CoatingUncoated
-
MaterialCarbon Steel
-
Thread Size2-1/2-8
-
Thread StandardNPT
-
Measurement SystemImperial
-
SeriesDWTPT
-
Cutting DirectionRight Hand
- They are appropriate for threading a wide variety of materials both ferrous and nonferrous
- The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap The thread tapers 3/4 of an inch per foot
- All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer
- NPT threads require the use of a sealer like teflon tape or pipe compound
-
UNSPSC23241615
-
Package DescriptionEACH
-
Standards/ApprovalsPROP65: This product contains Cobalt and/or Nickel and/or Lead a chemical known to the state of California to cause cancer, or birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
-
Catalog
Recently Viewed
Also called pipe taps, carbon steel NPT pipe taps are designed to clean and or re-thread damaged or jammed pipe threads. They are appropriate for threading a wide variety of materials both ferrous and nonferrous. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer NPT threads require the use of a sealer like teflon tape or pipe compound.
1.44 -OVERALL LENGTH COMPRESSION SPRINGS; MAXIMUM LOAD 4.22 LBS.-AJA77X >
210000-BTU HEATER ROTOR KIT-DYGSPKFA1022 >
Klein® 32482 Double End Replacement Screwdriver Insert Bit, #1, 3/16 in Phillips®/Slotted Point, 1-1/4 in OAL
A replacement bit contains a #1 Phillips and a 3/16-Inch Slotted tip. Fits the 11-in-1 (32500) and 10-in-1 (32477) Screwdriver/Nut Drivers. Precision-machined tips for exact fit into fastener.
The Grey Pneumatic 3042UM is a heavy-duty 3/4-inch drive x 42mm metric 6-point standard-length universal impact swivel socket. It features an integrated swivel joint that allows for angled access in tight spaces while handling high-torque impact loads. Core Technical Specifications Drive Size: 3/4-inchSocket Size: 42 mm Socket Type: Hex / 6-Point Universal Impact Swivel Length: Standard length (115 mm total length) Material: High-grade Chrome-Molybdenum (Chro-Moly) alloy steel Weight: 1.8 lbs Finish: Black oxide coating to resist rust and corrosion
Milwaukee® 48-20-3988 4-Cutter Rotary Hammer Drill Bit, 1-1/2 in Drill Bit, 45/64 in SDS-Max Shank, 18 in D Cutting, Carbide Cutting Edge, 23 in OAL
The MILWAUKEE® MX4™ 4-Cutter SDS Max Rotary Hammer Drill Bits with solid head carbide deliver up to 5x longer life in concrete with rebar. Engineered with rebar guards to provide maximum durability in hard aggregate and rebar. Milwaukee designed their MX4™ 4-Cutter bits with sharp centering tips for exact spot drilling in concrete. The integrated 4-cutter design prevents lock-up in rebar, reducing downtime. Optimized flutes remove dust faster, reducing heat and delivering up to 15% more holes per battery charge. The wear mark indicator on each drill bit shows you when they no longer meet the ANSI requirement. These MILWAUKEE® MX4™ 4-Cutter Drill Bits are ideal for concrete with rebar and masonry applications.
