GEARWRENCH® 3886 Tap and Die Set, 40 Pieces, M3x0.5 to M12x1.75 Tap Thread, M3x0.5 to M12x1.75 Die Thread, BSP/UNC/UNF Thread, Hexagon Die
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
-
BrandGEARWRENCH®
-
UPC082171388620
-
Manufacturer Part Number3886
-
CountryUSA|Canada
-
Tap MaterialCarbon Steel
-
Thread StandardBSP/UNC/UNF
-
Measurement SystemImperial/Metric
-
Number of Pieces40
-
Die MaterialCarbon Steel
-
Package TypeBlow Molded Case
- Ratcheting T-handles wind dies with a 5 swing arc and have a reversing lever to eliminate hand-over-hand turning
- Twist Lock guide system reduces the walk back of the die guide and keeps the dies centered while cutting
- Die adapters work with the 3/8 in drive Pass-Thru ratchet and socket system as well as socket accessories
- Auto-locking feature allow the tap adapters to be removed safely
- Spring-loaded cap allows for quick release of large tap adapter
- Drive extension adapters provide greater access in confined areas when used with 3/8 in drive extensions
- Blow mold case with tilted tap holders for easy access and storage
- Ratcheting T-wrench works with GEARWRENCH® Pass-Thru™ socket system
- Blow mold case with tilted tap holders for easy access and storage
| Competitor Name | Cross-Reference Number |
|---|---|
| Grainger | 3KLR4 |
| MSC | 01320142 |
-
UNSPSC27112800
-
Package DescriptionEACH
-
WarrantyLimited Lifetime
-
Catalog
-
Specification Sheet
Recently Viewed
GEARWRENCH® 3886 Tap and Die Set, 40 Pieces, M3x0.5 to M12x1.75 Tap Thread, M3x0.5 to M12x1.75 Die Thread, BSP/UNC/UNF Thread, Hexagon Die
GEARWRENCH has taken the ratcheting wrench design and applied it to the tap and die application. The ratcheting handles and adapters allow for easy back and forth movement required while cutting threads on either taps or dies. The 5° ratcheting arc with reversing lever eliminates hand over hand turning. The hex die adapters work on either round or hex shaped dies.
1" X 1" M/D BLUE RECT DIE SPRINGS-LANSMDR1000100 >
Coilhose® BL25 Heavy Duty Mechanical Tool Balancer, 18 to 25 lb Load, 8 ft L Cable
Coilhose® BL25 Heavy Duty Mechanical Tool Balancer, 18 to 25 lb Load, 8 ft L Cable
SCREW IN BICYCLE HOOK-JWH215171 >
Southwire® Romex® SIMpull® 63949221 Type NM-B Sheathed Cable With Ground Wire, Coil Packaging, 600 V, (3) 8 AWG Stranded Copper Conductor, 25 ft L, Black
Southwire® Romex® Brand SIMpull® NM-B (nonmetallic-sheathed) cable may be used for both exposed and concealed work in normally dry locations at temperatures not to exceed 90C (with ampacity limited to that for 60C conductors) as specified in the National Electrical Code. NM-B cable is primarily used in residential wiring as branch circuits for outlets, switches, and other loads. NM-B cable may be run in air voids of masonry block or tile walls where such walls are not wet or damp locations. Voltage rating for NM-B cable is 600 volts.
MORSE® 38153 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M8x1 Thread, D5 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
