Morse® Advanced Edge Power® 392167 Heavy Duty Reciprocating Saw Blade, 12 in L x 1 in W, 18, Bi-Metal Body
Morse RBWP124218T05 (392167), 12" x 18TPI, bimetal reciprocating saw blade is designed for cutting metal, from 1/8", up to 3/8", thickness. Wider, thicker blade body reduces blade deflection, increases rigidity, under heavier feed pressure. Five (5) blades per pack.
-
BrandMorse®
-
UPC050326392167
-
Manufacturer Part Number392167
-
CountryUSA|Canada
-
Teeth TypeStraight Pitch
-
Teeth per Inch18
-
Thickness0.042 in
-
TypeHeavy Duty
-
Applicable MaterialsComposite, Machinable Metal, Nail Embedded Wood, Plastic, Plaster and other Common Building Materials, Rubber and Wood
-
Width1 in
-
SeriesAdvanced Edge Power®
-
Cutting Edge MaterialBi-Metal
-
Body MaterialBi-Metal
-
Length12 in
- Bimetal construction - heat and wear resistance
- 1 in W for more rigidity and beam strength and 0.042 in W accepts heavier feed pressure
- Bi-metal construction for long cutting life and heat and wear resistant
- Straight tooth pitch gives a smooth cutting action
-
Alternative Part NumberRBWP124218T05
-
UNSPSC27112802
-
Package DescriptionEACH
-
WarrantyLimited
-
Warranty Information
-
Instruction/Installation Manual
-
Catalog
Recently Viewed
Morse® Advanced Edge Power® 392167 Heavy Duty Reciprocating Saw Blade, 12 in L x 1 in W, 18, Bi-Metal Body
Morse RBWP124218T05 (392167), 12" x 18TPI, bimetal reciprocating saw blade is designed for cutting metal, from 1/8", up to 3/8", thickness. Wider, thicker blade body reduces blade deflection, increases rigidity, under heavier feed pressure. Five (5) blades per pack.
Coilhose® PT1017-50B Polyurethane Tubing, 6.5 mm ID x 10 mm OD x 50 ft L x 1.75 mm THK Wall, 95A Polyurethane, Domestic
Coilhose® PT1017-50B Polyurethane Tubing, 6.5 mm ID x 10 mm OD x 50 ft L x 1.75 mm THK Wall, 95A Polyurethane, Domestic
Sealmaster® two and three piece rod end bearing housing designs have been optimized for overall strength. This housing advantage and variety of outer race materials including brass, steel, DELRIN and PTFE liners provide a wide selection of application solutions. Sealmaster® rod end bearings can be joined together or connected with a threaded rod or tube as linkage assemblies for flexibility in motion transfer. In addition Sealmaster® rod end bearings can accommodate angular misalignment to provide ease in assembly and smooth motion transfer in a variety of applications.
7/32" X 7/8" WOODRUFF KEY-MED1014 >
Steel shim is made from a full hard, cold rolled, low carbon 1008-1010 steel. Precision Brand® is the only manufacturer to offer Branded® shim. It has everything the user needs to know clearly marked right on the shim: material type, material thickness and lot # for full traceability. Used in applications where hardness, flatness and accuracy are required. Material can be punched or sheared with minimum burring and distortion. Precision Brand® shim stock is widely used in the following applications: tool and die set up, alignment, new machine assembly, machine repair and maintenance; mounting of motors, pumps and other machines, short run and prototype work, along with a variety of other industrial uses. It is especially useful for pilot production runs where material accuracy and economy are important. All Precision Brand® shim products are manufactured under rigorous quality control standards to assure high accuracy and tight tolerances.
Smith Bearing® CR-7/8-XB Cylindrical Stud Type Needle Bearing Cam Follower, 7/8 in Dia x 1/2 in W Roller, 3/8 in Dia x 7/8 in L Stud, 52100 Steel Roller
Hex head stud type needle roller bearings are recommended where running loads and shock loads are moderate. Bearing capacity of the stud type series is limited by the moderately sized stud. Manufactured from high alloy bearing quality steel.
