M.K. Morse 11/16" HOLESAWS--USE "MOR" MHS-11
Morse® AV11 Master Cobalt® Heavy Duty Hole Saw, 11/16 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge, 1/2-20 Arbor
-
BrandMorse®
-
UPC050326170116
-
Manufacturer Part NumberAV11
-
CountryUSA
-
TypeHeavy Duty
-
Use ArborM24, M24K, M34, M44 and M44K
-
Applicable MaterialsWood, Plastic, Machinable Metal, Stainless Steel Alloy and Nail Embedded Wood
-
Arbor Size1/2-20
-
SeriesMaster Cobalt®
-
Cutting Depth1-1/2 in
-
Shank Size1/4 in, 3/8 in, 7/16 in Hex, 1/4 in Round
-
Cutting Edge MaterialM3 HSS
-
Cutting Edge StylePositive Rake
-
Shank TypeHex/Round
-
Diameter11/16 in
-
Drill Size1/4 in Dia x 3-1/16 in L
-
Body MaterialBi-Metal
-
TPI or Pitch5 TPI
-
Alternative Part Number170116
-
UNSPSC23241601
-
Package Description1/BX
-
WarrantyLimited
-
Catalog
-
Warranty Information
Recently Viewed
Morse® AV11 Master Cobalt® Heavy Duty Hole Saw, 11/16 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge, 1/2-20 Arbor
18-TOOTH #60-1 CHAIN SPROCKETS IDC 60-B-18-F-1-5/8
18 TOOTH SPROCKETS FOR #60 CHAIN
Browning® 3750494 Taper Bore Bushing, 1-11/16 in Dia Bore, 4-1/4 in Dia Barrel, 3 in OAL
Dichtomatik S70011 O-Ring, 011 Dash Number, 0.301 in ID x 0.441 in OD, Silicone Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Appleton® ETP™ WFC1050G WFC Weatherproof Lighting Fixture With Guard, (1) Lamp, 120 V AC, Powder Coated Housing
Appleton® ETP™ WFC1050G WFC Weatherproof Lighting Fixture With Guard, (1) Incandescent Lamp, 120 VAC, Powder Coated Housing
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
