Morse® TA18 Hole Saw, 1-1/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Morse® TA18 Hole Saw, 1-1/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
-
BrandMorse®
-
UPC050326110181
-
Manufacturer Part NumberTA18
-
CountryUSA
-
Applicable MaterialsWood, Plastic, Machinable Metal, Stainless Steel Alloy and Nail Embedded Wood
-
Cutting Depth1-1/2 in
-
Shank Size7/16 in
-
Cutting Edge MaterialM3 HSS
-
Shank TypeHex
-
Diameter1-1/8 in
-
Drill Size1/4 in Dia x 4-5/16 in L
-
Body MaterialBi-Metal
-
TPI or Pitch5 TPI
-
Alternative Part Number110181
-
UNSPSC23241601
-
Package Description1/BX
-
WarrantyLimited
-
Catalog
-
Warranty Information
Recently Viewed
Morse® TA18 Hole Saw, 1-1/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Permatex® 80003 Form-A-Gasket® #1 Fast Dry Rigid Cure Gasket Sealant, 11 oz Tube
Permatex® Form-A-Gasket® No. 1 Sealant is a reddish brown, viscous paste with a characteristic alcoholic odor. It is a fast drying paste that changes to a hard, semi flexible seal through solvent evaporation. It seals flanges, fittings, connections and assembles against leakage. Improves gasket seal in permanent and rigid assemblies.
Milwaukee® HOLE DOZER™ 49-56-0724 Hole Saw With Carbide Teeth, 2-1/4 in Dia, 1.62 in D Cutting, Carbide Cutting Edge, 5/8-18 Arbor
The MILWAUKEE® 2-1/4" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
Milwaukee® HOLE DOZER™ 49-56-0702 Hole Saw With Carbide Teeth, 3/4 in Dia, 1.62 in D Cutting, Carbide Cutting Edge, 7/16 in Arbor
The MILWAUKEE® 3/4" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
DeWALT® Guaranteed Tough® DW3106 Large Diameter Thin Kerf Circular Saw Blade, 10 in Dia x 0.069 in THK, 5/8 in Arbor, Carbide Blade, 60 Teeth
DeWALT® Guaranteed Tough® DW3106 Large Diameter Thin Kerf Circular Saw Blade, 10 in Dia x 0.069 in THK, 5/8 in Arbor, Carbide Blade, 60 Teeth
Channellock® 3610 XLT™ Round Nose Linesman's Cutting Plier, 1.82 in L, 10-1/2 in OAL
Channellock® revolutionized linemen's pliers with the added benefit of Xtreme leverage technology (XLT™) XLT™ positions the rivet closer to the cutting edge so considerably less force is required to cut than other high leverage designs. The combination of XLT™, laser heat treated cutting edges and its unique heavy duty enclosed joint design makes this tool a must have for any toolbox.
