Hole Saw Arbors & Pilot Bits

Milwaukee® Carbide grit hole saws are designed for cutting abrasive materials such as brick, block, cement board, fiberglass and tile. Use a Carbide tipped pilot bit when cutting ceramic tile, brick, and other abrasive materials.

Milwaukee® 49-56-8000 Pilot Bit, 1/4 in Arbor, High Speed Steel

Milwaukee® Carbide tipped pilot bits are designed for long life in abrasive materials. Use for drilling fiberglass, brick, block and tile.

Milwaukee® hole saw arbors are made from hardened carbon steel and alloy steel for greater durability. The 49-56-9100 features a 7/16 in. hex shank, which can be used with any 7/16 in. extension. The 49-56-9100 also features a drive plate which is tightened up to the hole saw to eliminate wobble between the Arbor and hole saw.

No. 3 Morse taper assembly to fit Milwaukee annular cutters 3/4 in. shank.

For materials up to 3/16 in. these Carbide tipped sheet metal hole saws produce fine holes in stainless steel or structural steel studs. They can also improve your production in brass, aluminum and other thin sheet materials. Can be used in hand held drills to achieve drill press quality holes. Lubrication during drilling extends the life of the Carbide. Milwaukee recommends the use of Hawg Wash® cutting fluid for best results. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 2 in. diameter.

Replacement pilot bit for use with arbor model 49-57-0035 which can be used for both steel plate and sheet metal Carbide tipped hole saws. This bit is standard equipment.

The MILWAUKEE® Carbide Hole Cutter Pilot Bit features carbide teeth for longer life and smooth cuts in stainless steel and other hard metals. Each cutter features a stop shoulder design that prevents over-drilling and limits cuts to a 3/16 in. depth, while a 3-flat shank optimizes each cutter drill bit for use in Drill/Drivers. The spring-loaded pilot bit provides complete plug ejection for clean, efficient cutting of each hole. The solid one-piece design of each hole cutter provides added durability and dependability cut after cut.

Steel Hawg® arbor with No. 3 Morse taper shank for use in Milwaukee magnetic drill motors 4292-1 or 4297 - 1. This arbor adapts quick change Steel Hawg® cutters to a no. 3 internal Morse taper motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. Order oil hose(43-75-0010) and hand pump (44-46-0090) separately to distribute cutting fluid during drilling.

Steel Hawg® arbor with 3/4 in. shank for use in Milwaukee magnetic drill motors (model 4262-1). This arbor adapts quick change Steel Hawg® cutters to a 3/4 in. chucked motor. For best cutting results use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated.

Milwaukee® Thunderbolt® pilot bits are designed for extreme durability and long life. The Thunderbolt® web features a thicker core than a standard pilot bit, which provides ultimate strength and protects against side-load breakage. A specially designed parabolic flute form clears chips and debris fast to keep the bit cool. A precision start, 135° split point tip starts on contact to keep the bit from walking for fast, accurate holes. Excellent for drilling on curved surfaces, requires less effort to drill and is highly recommended for use with portable drills.

Morse MA24 (139007), 1/4" solid, impact ready shank can be used with any standard hole saw with 1/2"-20 thread pitch (3/4" to 1-3/16" diameter). High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.

Morse MA34 (139014), 3/8" solid, impact ready shank can be used with any standard hole saw with 1/2"-20 thread pitch (3/4" to 1-3/16" diameter). High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.

Morse MA35PSN (139052), spring loaded arbor provides a 3/8" solid shank that can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 6-5/8" diameter). The strength of the spring ensures the arbor pins remain engaged during use, effectively handling the torque generated by larger diameter hole saws, preventing thread strippage. Easily change hole saw diameters with efficiency and minimal effort. High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.

Morse MA45PSN (139069), spring loaded arbor provides a 7/16" solid shank can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 6-5/8" diameter). The strength of the spring ensures the arbor pins remain engaged during use, effectively handling the torque generated by larger diameter hole saws, preventing thread strippage. Easily change hole saw diameters with efficiency and minimal effort. High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.

Morse MA35 (139045), 3/8" solid, impact ready shank can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 2-1/4" diameter). High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.

Morse MAPD301 (139113), high speed steel, replacement pilot drill is a special length drill to support Morse "MA" series arbors. One (1) drill per pack.