Morse® 139045 Heavy Duty Hole Saw Arbor With MAPD301 Pilot Drill, 3/8 in Hex Shank, 3-3/32 in L Pilot Drill, Carbon Steel
Morse MA35 (139045), 3/8" solid, impact ready shank can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 2-1/4" diameter). High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.
-
BrandMorse®
-
UPC050326139045
-
Manufacturer Part Number139045
-
CountryUSA|Canada
-
MaterialCarbon Steel
-
TypeHeavy Duty
-
Applicable MaterialsMachinable Metal, Nail Embedded Wood, Plastic, Stainless Steel Alloy and Wood
-
Hole Saw Diameter1-1/4 to 6 in
-
Shank ShapeHex
-
Shank Size3/8 in
-
Pilot Drill Size3-3/32 in L
- 5/8 in-18 thread pitch
- Fits hole saws 1-1/4 in diameter to 2-1/4 in
- Long pilot drills and arbors have a pass through shank
- Hex arbors with non-slit jaw slots are positive drive
- SDS arbors are used in tools having SDS chucks, to drive hole saws in rotary hammers or hammer drills
-
Alternative Part NumberMA35
-
UNSPSC27112826
-
Package DescriptionEACH
-
WarrantyLimited
-
Catalog
-
Warranty Information
Recently Viewed
Morse® 139045 Heavy Duty Hole Saw Arbor With MAPD301 Pilot Drill, 3/8 in Hex Shank, 3-3/32 in L Pilot Drill, Carbon Steel
Morse MA35 (139045), 3/8" solid, impact ready shank can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 2-1/4" diameter). High speed steel pilot drill for use in wood, ferrous and non-ferrous metals. One (1) arbor per box.
10.5" BROODER HEAT LAMP WITH HOOKS & CLAMPS - ECI05961 >
Most traditional v-belts struggle with small spaces and cause frequent interruptions, leading to costly downtime. Reduce these common drive issues with Tri-Power, your tried-and-true classical section replacement V-belt. The Tri-Power bandless V-belt is specifically designed to tackle the challenges associated with small sheave diameters on existing drives. Whether powering compressors, pumps, or other critical equipment, this belt ensures that your machinery runs efficiently and reliably. The advantage of this bandless V-belt lies in its ability to provide a like-for-like replacement without the need for full-system replacements. Its advanced design not only suits small sheaves but also enhances power transmission and reduces maintenance needs. Choose Gates Tri-Power V-belts for a dependable high-quality solution that keeps your existing drives running longer without interruptions.
The Browning® torque limiter is a spring loaded friction style torque overload device. The load on the friction pads is adjusted so that the process torque is transmitted. An overload torque in excess of the set torque causes the unit to slip. This prevents overloads from transmitting through the system. When the load falls below the set level, the torque limiter stops slipping and transmits the torque. A torque limiter does not maintain phase between input and output. Although it is a similar size, the Browning® torque limiter has a higher torque density than the Morse® torque limiter. It is also well suited for applications that trip infrequently at high loads. It is most often used in a chain drive. A specially machined sprocket is inserted between the friction pads and acts as the slip interface. Torque capacity is up to 8800 in-lb.
Browning® offers an extensive multi groove sheave offering. This includes Browning® SPLIT TAPER® and QD® bushing designs. This means maximum economy and versatility for your application. Truly the right drive every time! Our exclusive B5V® sheaves have a patented design that offers 5 V hp in the economy of a B section sheave. B5V® sheaves serve 90% of all applications from 10 to 150 hp. This can reduce cost up to 40% over traditional designs.
DeWALT® XP™ DW8805 Depressed Center Wheel, 4-1/2 in Dia x 3/32 in THK, Z24R Grit, Zirconia Alumina Abrasive
