M.K. Morse 7/16"-PIN W/CT PILOT HOLESAW ARBOR MOR MA-45-PS-CT
Morse MA45PSNCT (139847), spring loaded arbor provides a 7/16" solid shank can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 6-5/8" diameter). The strength of the spring ensures the arbor pins remain engaged during use, effectively handling the torque generated by larger diameter hole saws, preventing thread strippage. Easily change hole saw diameters with efficiency and minimal effort. Carbide tipped pilot drill for use in masonry and abrasive applications. One (1) arbor per box.
-
BrandMorse®
-
UPC050326139847
-
Manufacturer Part Number139847
-
CountryUSA|Canada
-
Applicable MaterialsAcoustic Tile, Cement Board, Cinderblock, Composites, Comuter Flooring, and Fiberglass
-
Hole Saw Diameter1-1/4 to 6-5/8 in
-
Shank ShapeHex
-
Shank Size7/16 in
-
Cutting Edge MaterialCarbide
-
MaterialCarbide
- Carbide tipped pilot drill
- 5/8 to 18 in thread pitch
- Sping loaded, pin drive
- Fits hole saws 1-1/4 in diameter to 6-5/8 in
-
Alternative Part NumberMA45PSCT
-
Package Description1/PK
-
UNSPSC27112811
Recently Viewed
Morse MA45PSNCT (139847), spring loaded arbor provides a 7/16" solid shank can be used with any standard hole saw with 5/8"-18 thread pitch (1-1/4" to 6-5/8" diameter). The strength of the spring ensures the arbor pins remain engaged during use, effectively handling the torque generated by larger diameter hole saws, preventing thread strippage. Easily change hole saw diameters with efficiency and minimal effort. Carbide tipped pilot drill for use in masonry and abrasive applications. One (1) arbor per box.
MORSE® 38166 7500 General Purpose Straight Flute Hand Tap, Right Hand Cutting, M20x2.5 Thread, D7 Thread Limit, Tapered Chamfer, 4 Flutes, Bright, HSS
25/64 HSS JOBBERS LENGTH DRILLBIT-REP300F25/64 >
MORSE® 32660 2046 General Purpose Straight Flute Hand Tap, Right Hand Cutting, 1-12 Thread, H4 Thread Limit, Bottoming Chamfer, 4 Flutes, Bright, HSS
500-MA SMALL CERAMIC FUSES-EDIGDA500MA >
Also called pipe taps, carbon steel NPT pipe taps are designed to clean and or re-thread damaged or jammed pipe threads. They are appropriate for threading a wide variety of materials both ferrous and nonferrous. The nominal size of a Pipe Tap is that of the pipe fitting to be tapped, not the actual size of the tap. The thread tapers 3/4 of an inch per foot. All Pipe Taps furnished with a 2-1/2 to 3-1/2 thread chamfer NPT threads require the use of a sealer like teflon tape or pipe compound.
