Morse® 101653 Metal Devil NXT™ Circular Saw Blade, 12 in Dia x 0.079 in THK, 1 in Arbor, Hardened Steel Blade, 80 Teeth
Morse® 101653 Metal Devil NXT™ Circular Saw Blade, 12 in Dia x 0.079 in THK, 1 in Arbor, Hardened Steel Blade, 80 Teeth
-
BrandMorse®
-
UPC050326101653
-
Manufacturer Part Number101653
-
CountryUSA
-
Teeth TypeTCG
-
Thickness0.079 in
-
Maximum Speed3800 rpm
-
Tooth Angle10 deg
-
Applicable MaterialsAluminum
-
Arbor Size1 in
-
SeriesMetal Devil NXT™
-
Cutting Depth4-1/2 in
-
Cutting Edge MaterialTungsten Carbide/Titanium Carbide Tip
-
Diameter12 in
-
Number of Teeth80
-
Blade MaterialHardened Steel
-
Kerf0.102 in
- Cut through steel and other tough metals as easily as soft pine 2 x 4 in
- Move through metal faster than traditional methods like abrasives wheels
- Comfortable grips reduce user fatigue
- Retractable blade guard on saw
- Enhanced blade alignment guides reduce waste from miscuts
- Metal Devil NXT™ metal cutting circular saws blades offer a safer, cleaner way to cut metal
- The special motor maintains torque at optimum rpm's for cutting through metal smoothly and efficiently
| Competitor Name | Competitor Part Number |
|---|---|
| Grainger | 30M362 |
-
Alternative Part NumberCSM1280NAC
-
UNSPSC23242113
-
Package Description1/PK
-
WarrantyLimited
-
Warranty Information
-
Catalog
Recently Viewed
Morse® 101653 Metal Devil NXT™ Circular Saw Blade, 12 in Dia x 0.079 in THK, 1 in Arbor, Hardened Steel Blade, 80 Teeth
Morse® 101653 Metal Devil NXT™ Circular Saw Blade, 12 in Dia x 0.079 in THK, 1 in Arbor, Hardened Steel Blade, 80 Teeth
Chicago Pneumatic T022708 Ratchet Wrench, 3/8 in Drive, 70 N-m Torque, 150 rpm Speed, 15 cfm Air Flow, 90 psi
The CP828 series pneumatic ratchet wrench is designed for general maintenance with its torque of 50 ft.lbs / 70 Nm. The CP828 Series is composed of 2 models: 3/8 Inch and 1/2 Inch anvil.
Milwaukee® 49-57-8205 Quick-Change Hole Saw Plate Cutter, 13/16 in Dia, 1/2 in D Cutting, Carbide Cutting Edge
Specifically designed for hand held operations in materials up to 3/8 in. thick, these Carbide tipped steel plate cutters stay sharper longer than high speed steel or bi-metal hole saws. They produce drill press quality holes even in hand held operations. For cutting materials over 3/8 in. up to a depth of 1/2 in., a drill press is recommended. When cutting depth is over 1/4 in., use Hawg Wash® cutting fluid to keep cutting surface cool and lubricated. Hawg Wash® fluid is available in 16 oz. Bottles (49-32-0081). One bottle makes one gallon of lubricating solution. 13/16 in. diameter.
Morse® TA18 Hole Saw, 1-1/8 in Dia, 1-1/2 in D Cutting, M3 HSS Cutting Edge
Permatex® 80003 Form-A-Gasket® #1 Fast Dry Rigid Cure Gasket Sealant, 11 oz Tube
Permatex® Form-A-Gasket® No. 1 Sealant is a reddish brown, viscous paste with a characteristic alcoholic odor. It is a fast drying paste that changes to a hard, semi flexible seal through solvent evaporation. It seals flanges, fittings, connections and assembles against leakage. Improves gasket seal in permanent and rigid assemblies.
Milwaukee® HOLE DOZER™ 49-56-0724 Hole Saw With Carbide Teeth, 2-1/4 in Dia, 1.62 in D Cutting, Carbide Cutting Edge, 5/8-18 Arbor
The MILWAUKEE® 2-1/4" HOLE DOZER™ with Carbide Teeth Hole Saw features a new 3 TPI design that offers fast cuts with the durability of a bi-metal hole saw and life of a carbide hole saw. This Milwaukee hole saw provides the longest life in general purpose and extreme materials with the ability to cut through stainless steel, cast iron, fastener embedded wood, cement board, fiberglass, plaster, asphalt shingles, and more with ease. Deep gullets clear material fast while cutting, and Milwaukee's ALL-ACCESS SLOTS solve the frustration of plug removal for more productivity with less downtime between holes. The new slot design also provides increased pilot visibility for accurate placement and faster chip ejection keeping cuts cool. The HOLE DOZER™ with Carbide Teeth Hole Saw has a cutting depth of 1.62 in., allowing clearance to handle cuts in a wide range of materials. Milwaukee HOLE DOZER™ with Carbide Teeth Hole Saws are proudly made in the USA.
