Roughing & Finishing End Mills
MORSE® 43829 1901 Extra Long Length Non-Center Cutting Single End End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 5 in OAL, Bright
MORSE® 90804 5943T Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiAlN Coated
MORSE® 57932 5943 Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
MORSE® 43278 1895 Double End Non-Center Cutting Regular Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
MORSE® 44591 4582 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4-1/8 in OAL, Bright
MORSE® 57132 5895 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
MORSE® 90730 5943G Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiN Coated
MORSE® 44467 4593 Non-Center Cutting Single End Roughing End Mill, 1/2 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
MORSE® 95075 5968T Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiAlN Coated
MORSE® 90886 5951T Center Cutting Extra Long Length Single End End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, TiAlN Coated
MORSE® 92366 5929T Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, TiAlN Coated
MORSE® 95837 5980 Center Cutting Honed Edge Regular Length Single End Mill, 1/2 in Dia Cutter, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Aluminum Chromium Titanium Nitride
MORSE® 90846 5955T Center Cutting Long Length Single End End Mill, 1/2 in Dia Cutter, 2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, TiAlN Coated
MORSE® 90866 5951G Center Cutting Extra Long Length Single End End Mill, 1/2 in Dia Cutter, 3 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 6 in OAL, TiN Coated
MORSE® 58145 5955 Center Cutting Medium Length Single End Mill, 1/2 in Dia Cutter, 1-1/2 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 4 in OAL, Bright
MORSE® 57471 5929 Center Cutting Regular Length Single End End Mill, 1/2 in Dia Cutter, 1 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3 in OAL, Bright
MORSE® 44476 4593 Center Cutting Regular Length Single End Roughing End Mill, 1/2 in Dia Cutter, 1-1/4 in Length of Cut, 4 Flutes, 1/2 in Dia Shank, 3-1/4 in OAL, Bright
MORSE® 44571 4581 Center Cutting Double End Regular Length End Mill, 1/2 in Dia Cutter, 13/16 in Length of Cut, 2 Flutes, 1/2 in Dia Shank, 3-3/4 in OAL, Bright
MORSE® 43261 1895 Double End Non-Center Cutting Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 57904 5943 Center Cutting Regular Length Single End End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
MORSE® 90776 5943T Center Cutting Regular Length Single End End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 4 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, TiAlN Coated
MORSE® 58004 5944 Center Cutting Regular Length Single End End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 1/8 in Dia Shank, 1-1/2 in OAL, Bright
MORSE® 43403 1896 Center Cutting Double End Regular Length End Mill, 1/16 in Dia Cutter, 3/16 in Length of Cut, 2 Flutes, 3/16 in Dia Shank, 2-1/4 in OAL, Bright
MORSE® 45132 4640 Center Cutting Regular Length Roughing End Mill, 1 in Dia Cutter, 2 in Length of Cut, 5 Flutes, 3/4 in Dia Shank, 4-1/4 in OAL, Bright
Recently Viewed
PRESSURE WASHER WATER BROOM-JWH790093>
1-1/2" -ID S-FLEX COUPLING HALVES-IDC7S11/2K >
Milwaukee® 48-89-9207 Step Drill Bit, 7/8 in Dia Min Hole, 7/8 in Dia Max Hole, 1 Step, HSS, 1 Hole Size, 3/8 in Shank
Milwaukee® step drill bits with jam-free performance feature a dual-flute design delivering up to 2X faster hole times, up to 4X longer life and up to 50% more holes per battery charge than competitors. Ideal for drilling small and large-diameter holes in steel and plastic, these bits are optimized for cordless drills in high speed. The Rapid Strike™ tip allows for a fast and accurate start that generates less heat, resulting in longer bit tip life. Black oxide coating also enhances durability, hole quality and bit life. For user convenience and accuracy, each bit has laser-engraved reference marks you can see while drilling. The 3-flat Secure-Grip™ shank ensures a solid connection with the drill chuck. The #7 step drill bit comes in one hole size: 7/8 in.. jam-free performance in high speed with most professional 18 Volt cordless drills with lithium-ion battery technology.
Crescent® PHV1433DMN P1000 Tape Measure, 33 ft L x 1 in W Blade, Steel Blade, 1/10 ft, 1/100 ft Graduation
Crescent built its reputation on durability and these new tapes are no exception. The P1000 Series cases are made of tough ABS plastic, modified for increased strength and impact resistance. Every blade is protected with a clear-coat that exceeds ASTM standards for abrasion and corrosion resistance.
GEARWRENCH® 9150 Jumbo Non-Reversible Open End Regular Length Combination Wrench, 50 mm Wrench, 12 Points, 0/15 deg Offset, 25.787 in OAL, High Alloy Steel, Polished Chrome
GEARWRENCH Original ratcheting wrenches combine the speed of a ratchet with the access and control of a wrench. They offer the ease of 5 degrees of movement to turn fasteners, versus 30 degrees on standard combination wrenches. The small ratcheting box end head design enables access to tight spots where a ratchet won't fit. The open end allows for easier access on tough to reach spots, making jobs go faster and easier. This set is a great addition to any mechanic tools collection.
Irwin® WeldTec™ 3043012 Ship Auger Bit, 15/16 in Dia, 17 in OAL, 12 in L Hollow Center Flute, 7/16 in Shank
The IRWIN with WeldTec ship auger is made stronger and lasts longer than any standard augers. It features a welded cutting edge that easily cuts through tough materials like nail-embedded wood. It has twice the nail cutting life of standard ship augers. With an aggressive screw-pitch for fast drilling, this bit is fully-forged for durability, and wide flutes provide chip removal with less binding.
