MORSE® 59079 5989 Regular Length Single End Drill Mill, 3/16 in Dia, 60 deg Point, 2 Flutes, 5/8 in L Flute, 5/8 in L of Cut, 3/16 in Dia Shank, 2 in OAL, Bright
MORSE® 59079 5989 Regular Length Single End Drill Mill, 3/16 in Dia, 60 deg Point, 2 Flutes, 5/8 in L Flute, 5/8 in L of Cut, 3/16 in Dia Shank, 2 in OAL, Bright
-
BrandMORSE®
-
UPC686125590796
-
Manufacturer Part Number59079
-
CountryUSA
-
FinishBright
-
Point Angle60 deg
-
MaterialSolid Carbide
-
Flute Length5/8 in
-
Flute TypeRight Spiral
-
TypeRegular Length Single End
-
Series5989
-
Shank Diameter3/16 in
-
Number of Flutes2
-
Cutting DirectionRight Hand
-
Cutting Edge MaterialSolid Carbide
-
Shank TypePlain/Round
-
Diameter3/16 in
-
Length of Cut5/8 in
-
Overall Length2 in
- 2-flute end mill provide increased chip capacity for higher feed rates
- Solid carbide offers excellent hardness, wear resistance and heat resistance for higher cutting speeds and longer tool life
-
UNSPSC27112803
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
-
Catalog
Recently Viewed
MORSE® 59079 5989 Regular Length Single End Drill Mill, 3/16 in Dia, 60 deg Point, 2 Flutes, 5/8 in L Flute, 5/8 in L of Cut, 3/16 in Dia Shank, 2 in OAL, Bright
MORSE® 59079 5989 Regular Length Single End Drill Mill, 3/16 in Dia, 60 deg Point, 2 Flutes, 5/8 in L Flute, 5/8 in L of Cut, 3/16 in Dia Shank, 2 in OAL, Bright
5/16" X 1-1/4" USS Hex Head GR-2 Tap Bolt
BRAZING ALLOY A brazing alloy that is ideal for large and small copper tubing installations. Self-fluxing on copper. Typical applications include: Refrigeration control valves (copper and brass), joining copper wires to rotor bars, electrical connections, radiant heating systems, air conditioning units, hot and cold water lines, and heat exchanges. T-joints, swage joints and sleeves, couplings on return bends and condenser fittings. Sil-Flo is not recommended for ferrous metals such as iron or steel. It is only for copper base metals as an effective economical alternative to copper-silver alloy rods.
SELECTA® ST-18-BG Insulated Switch Butt Connector, 22 to 18 AWG Conductor, 0.95 in L, Butted Seam Barrel, Copper, Red
SELECTA® ST-18-BG Insulated Switch Butt Connector, 22 to 18 AWG Conductor, 0.95 in L, Butted Seam Barrel, Copper, Red
3/4" X 36" SMOOTH SHAFT ROD-NTL179820 >
Dichtomatik 67004048 O-Ring, 13 mm ID x 17 mm OD, Nitrile Rubber, 70 Shore A Durometer, Domestic
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
