Taper Pin Reamers
MORSE® 22595 1680, #8, 0.3971 in Small End, Straight Flute, Straight Shank
MORSE® 22594 1680 Taper Pin Reamer, #7 Taper Pin, 0.3297 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22592 1680 Taper Pin Reamer, #5 Taper Pin, 0.2409 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22591 1680 Taper Pin Reamer, #4 Taper Pin, 0.2071 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22590 1680, #3, 0.1813 in Small End, Straight Flute, Straight Shank
MORSE® 22589 1680 Taper Pin Reamer, #2 Taper Pin, 0.2008 in Dia Reamer, 0.1605 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22597 1680 Taper Pin Reamer, #10 Taper Pin, 0.5799 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22617 1683, #0, 0.1287 in Small End, Helical Flute, Straight Shank
MORSE® 22587 1680 Taper Pin Reamer, #0 Taper Pin, 0.1287 in Dia Small End, Straight Flute, Straight Shank
MORSE® 22588 1680 Taper Pin Reamer, #1 Taper Pin, 0.1447 in Dia Small End, Straight Flute, Straight Shank
Recently Viewed
FLAT GRAY SANDABLE SPRAY PRIMER-RUS1980 >
Type S NEMA motor starters are used for full voltage starting and stopping of AC squirrel cage motors. Type S motor starters have ratings up to 810 amperes. This 3 pole NEMA Size 0 non-reversing starter has an 18 ampere rating. NEMA Size 0 motor starters have 3 phase ratings of 3 HP at 200 and 230 VAC and 5 HP at 460 and 575 VAC. This non-reversing NEMA motor starter has a melting alloy type overload relay that uses Type B thermal units to sense over current conditions. This NEMA starter has a 5 kA maximum SCCR (Short Circuit Current Rating) per UL508A when protected by an appropriate circuit breaker or fuse. Type S motor starters are available with replaceable coils in a wide variety of voltages. This starter has a 440/480 VAC 50/60 Hz operating coil wired for common control. This NEMA starter is an open device without an enclosure. This starter is 6.77 inches tall, 4.52 inches wide and 4.22 inches deep. A wide variety of accessories are available for Type S starters. Type S non-reversing NEMA motor starters are UL listed and CSA certified.
Southwire® 779765 Pallet Jack, 6600 lb Load, 2.5 in H Fork Raised, 45.12 in H x 27 in W x 63 in L
The Southwire Low Profile 27” x 48'' Pallet Jack will handle the heavy lifting for you. The pallet jack’s 2.5” low profile fork height allows for easy engagement of most pallets. A welded all-steel frame and tough powder coat finish provides maximum durability and protection.
Proto® J6222RD Wrench Replacement Kit, For Use With J6222, J6222CERT, J6234 1 in Square Drive Torque Multiplier
3" X 110-YD CLEAR BOX SEALING TAPE-ATC61003X110YD >
SANDER 5/8"-11 DISC RETAINER NUTS-MWK49400350>
