Hand Reamers
MORSE® 21309 1602, 1-1/4 in Dia, 12-1/4 in OAL, 1-1/4 in Straight Shank, Left Helical Flute
MORSE® 21309 1602, 1-1/4 in Dia, 12-1/4 in OAL, 1-1/4 in Straight Shank, Left Hand Helical Flute
MORSE® 21254 1601 Hand Reamer, 1-1/8 in Dia x 11-5/8 in OAL, 1-1/8 in Dia Straight Shank, Straight Flute
MORSE® 21254 1601 Hand Reamer, 1-1/8 in Dia x 11-5/8 in OAL, 1-1/8 in Dia Straight Shank, Straight Flute
GENERAL® 130 T-Handle Reamer, 1/8 to 1/2 in Dia x 5-3/4 in OAL
Drillco 445E140 4450E Imperial Hand Reamer, 5/8 in Dia x 7 in OAL, Square Shank, Spiral Flute
Hand Reamers are widely used for final sizing of drilled holes. The square on the shank end is suitable for holding in a tap wrench or vise. The cutting edge is ground with a starting taper to provide easy entry.
Recently Viewed
Enerpac® SCL-502H SC Series Single Acting Low Height Cylinder Pump Set, 50 ton, 2.38 in Stroke, 4.81 in H Collapse, 7.19 in H Extended, Steel
Enerpac® SCL-502H SC Series Single Acting Low Height Cylinder Pump Set, 50 ton, 2.38 in Stroke, 4.81 in H Collapse, 7.19 in H Extended, Steel
Steel City® BU506-1 Non-Metallic Bushing, 2 in Conduit, 2 in Trade, Plastic
WELDING ROD STORAGE CONTAINERS - 32299
WELDING ROD STORAGE CONTAINERS-FOR32299 >
3/32" SUPER NICKEL CAST 55 PERCENT NICKEL SPECIALTY ROD Super Ni-Cast 55% nickel is the ultimate rod for all known grades of cast iron. Extra nickel content for crack resistant, machinable welds. Great for joining heavy or thin sections to steel. The computer controlled coating produces welds that represent the optimum balance between tensile strength and machinability. Typical applications include welding grades 30, 40 and 50 gray cast irons - all thicknesses in all positions.
7" X 1/16" X 5/8" CUTTING WHEELS-FOR72314>
Dichtomatik 67004010 O-Ring, 10 mm ID x 14 mm OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
