MORSE® 22364 1655M Chucking Reamer, 8 mm Dia x 6 in OAL, 0.2792 in Dia Straight Shank, Straight Flute
MORSE® 22364 1655M Chucking Reamer, 8 mm Dia x 6 in OAL, 0.2792 in Dia Straight Shank, Straight Flute
-
BrandMORSE®
-
UPC686125223649
-
Manufacturer Part Number22364
-
CountryUSA
-
FinishBright
-
MaterialHSS
-
Flute Length1-1/2 in
-
Flute TypeStraight
-
Series1655M
-
Shank Diameter0.2792 in
-
Number of Flutes6
-
Cutting DirectionRight Hand
-
Shank TypeStraight
-
Diameter8 mm
-
Overall Length6 in
- 45 deg chamfer for reaming most materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT5222364 |
-
UNSPSC23241645
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 22364 1655M Chucking Reamer, 8 mm Dia x 6 in OAL, 0.2792 in Dia Straight Shank, Straight Flute
MORSE® 22364 1655M Chucking Reamer, 8 mm Dia x 6 in OAL, 0.2792 in Dia Straight Shank, Straight Flute
96" X 30" COMPOSITION WORKBENCH TOPS-HLW6000RW9630>
MORSE® 55224 5655 Chucking Reamer, 3/8 in Dia x 7 in OAL, 5/16 in Dia Straight Shank, Straight Flute
MORSE® 55224 5655 Chucking Reamer, 3/8 in Dia x 7 in OAL, 5/16 in Dia Straight Shank, Straight Flute
Precision Brand® 25103 Arbor Shim, 3/8 in ID x 5/8 in OD, 0.002 in THK, Full Hard Steel/Low Carbon Steel
Made of high quality, low carbon, cold rolled, full hard, steel shim. Arbor shims have no keyways. Saves time over re-machining. Precision thicknesses for more accurate results. Packaged in airtight poly bag. Precision Brand® arbor shims are used for fast, accurate spacing of milling cutters, gang cutters, saws, slitting blades and grinding tools.
Wilton® WL9-14830 Magnetic Jaw Cap, For Use With Any Vise, 5 in W Jaw, Aluminum Alloy
Wilton A5 Aluminum Jaw Caps have a six-groove design to firmly grasp and hold workpieces with irregular surfaces. These authentic replacement caps are designed to protect both the vise jaws and the workpiece from marring and distortion during any clamping application.
Dichtomatik N70105 O-Ring, 105 Dash Number, 0.143 in ID x 0.349 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
