MORSE C/Tool .2510" CHUCKING REAMERS HSS MCT 22185
MORSE® 22185 1655 Chucking Reamer, 0.251 in Dia x 6 in OAL, 0.2405 in Dia Straight Shank, Straight Flute
-
BrandMORSE®
-
UPC686125221850
-
Manufacturer Part Number22185
-
CountryUSA
-
FinishBright
-
MaterialHSS
-
Flute Length1-1/2 in
-
Flute TypeStraight
-
Series1655
-
Shank Diameter0.2405 in
-
Number of Flutes6
-
Cutting DirectionRight Hand
-
Shank TypeStraight
-
Diameter0.251 in
-
Overall Length6 in
- 45 deg chamfer for reaming most materials
| Competitor Name | Competitor Part Number |
|---|---|
| Berkshire eSupply | MT5022185 |
-
UNSPSC23241645
-
Package Description1/PK
-
Standards/ApprovalsISO 9001:2008
Recently Viewed
MORSE® 22185 1655 Chucking Reamer, 0.251 in Dia x 6 in OAL, 0.2405 in Dia Straight Shank, Straight Flute
Milwaukee® M18™ FUEL™ 2737B-20 Barrel Grip Cordless Jig Saw, 18 V DC, For Blade Shank: T-Shank, 9.13 in OAL, Li-Ion Battery
The M18™ FUEL™ barrel grip jig saw combines power, blade speed and precision, to provide the highest quality cuts in a wide variety of materials. The M18™ FUEL™ D-handle jig saw leverages the POWERSTATE brushless motor and REDLINK Plus™ intelligence to provide higher blade speed than corded jig saws at 3500 strokes per minute for clean controlled cuts with minimized chipping or bucking. Leveraging the M18™ REDLITHIUM™ XC5.0 battery the M18™ FUEL™ D-handle jig saw provides up to 105 linear feet of cutting in 3/4 in. laminated particle board, delivering all day productivity with less trips to the charger. The saw features tool-less blade change, tool free bevel adjust with pin detent at 0°; 15°; 30°; and 45° as well as an LED light and on/off blower to keep the cut line visible while cutting.
Magnolia Brush 2024 General Purpose Floor Broom With M-60 Handle, 3 in L Trim, Black Plastic Bristle
Magnolia Brush 2024 General Purpose Floor Broom With M-60 Handle, 3 in L Trim, Black Plastic Bristle
Dichtomatik N70015 O-Ring, 015 Dash Number, 0.551 in ID x 0.691 in OD, Nitrile Rubber, 70 Shore A Durometer, Import
O-rings are closed circular rings of circular cross-section. They are made through vulcanization from form tools as a complete ring. The sealing function of the O-ring is achieved by the deformation of the cross-section when installed and compressed in its housing. The O-ring can be compressed either radially or axially in its installation housing. In operating conditions the pressure exerted by the media reinforces the sealing function, as under pressure the elastomer material functions as a non-compressible fluid.
Jackson Safety* 14407 Sentry III Cap Style Hard Hat, 6-1/2 Fits Mini Hat, 8 Fits Max Hat, HDPE, 6-Point Suspension, ANSI Electrical Class Rating: Class C, E and G, ANSI Impact Rating: Type I, Ratchet Adjustment
Klein® D257-4C Long Tapered Nose Midget Cutting Plier, 7/16 in Nominal, 0.5 in L x 0.438 in W x 0.5 in THK Jaw Steel Jaw Standard Jaw, 4-1/4 in OAL
With Klein Tools' 4-Inch Electronics Pliers, you can easily work in confined spaces. The short jaws and beveled cutting edges permit close cutting of wire. These diagonal cutting pliers feature a hot-riveted joint that ensures smooth action and no handle wobble.
